Tripp SMART1500XL , Ups, Smartpro 1500va, 120v, 980w, Tower, Avr, 6 X 5-15r Outlets, Usb, Db9

OUTPUT
Output Volt Amp Capacity (VA) :1500
Output kVA capacity (kVA) :1.5
Output Watt Capacity (watts) :980
Output power factor :0.7
Nominal Output Voltage(s) Supported :120V
Frequency compatibility :60 Hz
Output voltage regulation (line mode) :-18%, +8%
Output voltage regulation (Battery mode) :+/- 5%
Built-in UPS output receptacles :6 5-15R outlet(s)
Built-in controllable switched load banks :One switchable single-outlet 5-15R load bank
Output AC waveform (AC mode) :Sine wave
Output AC waveform (battery mode) :PWM sine wave INPUT
Rated input current (at maximum load) :12A
Nominal Input Voltage(s) Supported :120V AC
UPS input connection type :5-15P
Input circuit breaker :15A
UPS Input cord length (ft.) :6
UPS Input cord length (m) :1.8
Recommended Electrical Service :15A 120V BATTERY
Full load runtime (minutes) :7 min. (980w)
Half load runtime (minutes) :20 min. (490w)
Expandable battery runtime :Extended runtime supported via optional external battery packs
External battery pack compatibility :BP36V15-2U (limit 1) BP36V42-3U (multi-pack compatible)
DC system voltage (VDC) :36
Battery recharge rate (included batteries) :Less than 4 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement) :RBC53
Battery Access :Battery access door
Battery replacement description :Hot-swappable, user replaceable batteries VOLTAGE REGULATION
Voltage regulation description :Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Overvoltage correction :Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction :Input voltages between 93 and 107 are boosted by 14%
Severe undervoltage correction :Input voltages between 75 and 92 are boosted by 30% LEDS ALARMS and SWITCHES
LED Indicators :5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms :Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation :Power-fail alarm can be silenced using alarm-cancel switch once silenced, alarm will re-sound to indicate low-battery status
Switches :2 Switches control off/on power status and alarm-cancel/self-test operation SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating :480
UPS AC suppression response time :Instantaneous
EMI / RFI AC noise suppression :Yes

PHYSICAL
Installation form factors supported with included accessories :Tower
Installation form factors supported with optional accessories :Wallmount (UPSWM - tower mounting kit)
Primary form factor :Tower
UPS housing material :PVC
Cooling method :Fan COMMUNICATIONS
Communications interface :USB DB9 Serial
Network monitoring port description :Supports detailed monitoring of UPS and site power conditions
PowerAlert software :Included
Communications cable :USB and DB9 cabling included
WatchDog compatibility :Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER
Transfer time :2-4 milliseconds
Low voltage transfer to battery power (setpoint) :75
High voltage transfer to battery power (setpoint) :147

SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) :Cold-start operation supported
High availability UPS features :Hot swappable batteries
Green high efficiency features :Greater than 95% efficiency - GREEN UPS Individually controllable load banks

CERTIFICATIONS
UPS Certifications :Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category A (EMI) Item Dimension (L"xW"xH"):
18 x 12 x 13.5

Weight:
46.0 lb

Warranty Information
2 Years