Supermicro SYS-F618R2-RC1PT+ System Sys-f618r2-rc1pt+ 4u Rackmount Ddr3 Xeon E5-2600v4 6x2.5inch Sata 2000w Brown Box

Form Factor
4U Rackmount Processor/Cache
CPU:
- Intel Xeon Processor E5-2600 v4/v3 Family (Up to 145W TDP)
- Dual Socket R3 (LGA 2011)
Cores/Cache: Up to 22 Cores / Up to 55MB Cache
System Bus: QPI up to 9.6 GT/s System Memory
Memory Capacity:
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage: 1.2V
Error Detection: Corrects Single-Bit Errors On-Board Devices
Chipset: Intel C612 Chipset
SAS: LSI 3108 SAS3 (12Gbps) controller HW RAID 0, 1, 5, 6, 10, 50, 60
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
-Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers:
- Intel X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics: ASPEED AST2400 BMC Input/Output (Per Node)
SAS: 6 SAS3 (12Gbps) Ports
NVMe: 2 Internal NVME Ports (PCIe 3.0 x4) (Note: NVMe Supports requires 2 CPUs Installed)
LAN:
- 2 RJ45 10GBase-T LAN Ports
- 1 RJ45 Dedicated IPMI LAN Port
VGA: 1 VGA Port Management
Software:
- Intel X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Power Configurations:
- ACPI/APM Power Management
- Power-on Mode for AC Power Recovery Front Panel
Buttons:
- Power On/Off Button
- UID Button
LEDs:
- Power Status LED
- Hard Drive Activity LED
- 2 Network Activity LEDs
- Information LED (UID, Fan Failure, Overheat) Expansion Slots (Per Node)
PCI-Express:
- 1 PCI-E 3.0 x16 Low-profile
- 1 PCI-E 3.0 x8 (Micro LP)
- MicroLP Adapter Matrix (Networking options) Dive Bays (Per Node)
Hot-Swap: 6x 2.5" Hot-swap SAS/SATA or 4x 2.5" Hot-swap SAS/SATA + 2x SAS/SATA/NVMe hybrid Backplane
1 x SAS/SATA Backplane System Cooling (Per Node)
Fans: 3 x 4cm 14K RPM Middle Fan Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power: 1000W/2000W
Input:
- 100-127 Vac / 12-9.5 A / 50-60 Hz
- 200-220 Vac / 10-9.5 A / 50-60 Hz
- 220-230 Vac / 10-9.8 A / 50-60 Hz
- 230-240 Vac / 10-9.8 A / 50-60 Hz
- 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only)
+12V:
- Max: 83.3A Min: 0A (100-127 Vac)
- Max: 150A Min: 0A (200-220 Vac)
- Max: 165A Min: 0A (220-230 Vac)
- Max: 166.7A Min: 0A (230-240 Vac)
- Max: 166.7A Min: 0A (200-240 Vac)(UL/cUL only)
+5Vsb: Max 1A / Min 0A
Output Type: 27 Pairs Gold Finger Connector
Certification: 80PLUS Titanium System BIOs
BIOs Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOs Features:
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI Operating Environment/Compliance
RoHS: RoHS Compliant
Environmental Specs:
- Operating Temperature: 10 C to 35 C (50 F to 95 F)
Non-Operating Temperature: -40 C to 70 C (-40 F to 158 F)
Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-Operating Relative Humidity: 5% to 95% (non-condensing) Weight
200.00 lb

Warranty Information
1 Year