Tripp SU12000RT4UHW , Ups, Smartonline 12,000va, 8u, 208120v Or 240120v, 8400w, Hardwire, Usb, Db9

OUTPUT
Output Volt Amp Capacity (VA) : 12000
Output kVA capacity (kVA) : 12
Output Watt Capacity (watts) : 8400
Output kW capacity : 8.4
Output power factor : 0.7
Output Capacity Details : 12,000 VA (240V) / 10,395 VA (208V) / 8,400 watts (208/240V) Crest Factor : 3:1
Nominal Output Voltage(s) Supported : 120V 208V 240V
Nominal Voltage details : 240/120V or 208/120V split phase output
Frequency compatibility : 60 Hz
Output voltage regulation (line mode) : +/- 3%
Output voltage regulation (Economy line mode) : +/- 10%
Output voltage regulation (Battery mode) : +/- 3%
Built-in UPS output receptacles : Hardwire
Output AC waveform (AC mode) : Sine wave INPUT
Rated input current (at maximum load) : 50A

Nominal Input Voltage(s) Supported :
208V AC / 120V AC (4 wire split single phase) 240V AC /120V AC (4 wire split single phase)

UPS input connection type : Hardwire
UPS input connection description : 4 wire split-phase input (L1, L2, N, G)
Recommended Electrical Service : 50A 208/240-120 Split Phase BATTERY
Full load runtime (minutes) : 7 min. (8400w)
Half load runtime (minutes) : 20 min. (2400w)
Expandable battery runtime : Supports extended runtime with optional external battery packs

External battery pack compatibility
BP192V18-4U BP192V557C-16K BP192V787C-16K BP192V1037C-16K BP192V1407C-16K

DC system voltage (VDC) : 192
Battery recharge rate (included batteries) : Less than 6 hours from 10% to 80%
Battery replacement description : Hot-swappable, user replaceable batteries VOLTAGE REGULATION
Voltage regulation description :
Online, double-conversion power conditioning
Overvoltage correction :
3% output voltage regulation during overvoltages to 140 (measured L1-N : L2-N)
Undervoltage correction :
3% output voltage regulation during undervoltages to 65 (measured L1-N : L2-N) LEDS ALARMS AND SWITCHES
LED Indicators :
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status LCD screen offers additional information and control options

Alarms :
Unique audible alarms for all major UPS, environmental and power conditions (see manual)

Alarm cancel operation :
Alarm cancel switch Switches :
2 Switches control off/on power status and alarm-cancel/self-test operation 2 additional switches support set and execute scrolling LCD functions bundled PDU includes bypass switch to enable hot-swap UPS power module replacement SURGE / NOISE SUPPRESSION
UPS AC suppression response time : Instantaneous
EMI / RFI AC noise suppression : Yes PHYSICAL
Included mounting accessory description :
2 sets of adjustable 4 post rack rails included

Installation form factors supported with optional accessories :
2 post rackmount (2POSTRMKITWM) Tower (2-9USTAND)
Primary form factor : Rackmount UPS / Power Module dimensions in primary form factor (height x width x depth / inches) :
7 x 17.5 x 40.5
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) :
17.8 x 44.4 x 102.9
Installed whole system maximum rack depth (inches) :
40.5
Installed whole system maximum rack depth (cm) :
102.9 Installed whole system total rack space height (rack spaces) :
8U
Secondary form factor :
Tower (requires 2-9USTAND)

UPS / Power Module weight (lbs) :
86
UPS / Power Module weight (kg) :
39
UPS dimensions details :
Includes 4U power module and 4U battery pack Included battery pack dimensions (height x width x depth / inches) :
7 x 17.5 x 27.8
Included battery pack dimensions (height x width x depth / cm) :
17.7 x 44.4 x 70.6
Included battery pack weight (lbs) :
239
Included battery pack weight (kg) :
108.5
UPS Shipping dimensions (height x width x depth / inches) :
45.5 x 23.5 x 34.3
UPS Shipping dimensions (height x width x depth / cm) :
115.6 x 59.7 x 87.1
Shipping weight (lbs) :
448.8
Shipping weight (kg) :
203.8
UPS housing material :
Steel
Cooling method :
Fan COMMUNICATIONS
Communications interface :
USB (HID enabled) DB9 Serial Contact closure EPO (emergency power off) Slot for SNMP/Web interface
Network monitoring port description :
RS232 and contact closure communications are supported on one DB9 port
PowerAlert software :
Included
Communications cable :
USB and DB9 cabling included LINE / BATTERY TRANSFER
Transfer time : No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to battery power (setpoint) : 65V (L1-N:L2-N)
High voltage transfer to battery power (setpoint) : 140V (L1-N:L2-N) SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) :
Cold-start operation supported

High availability UPS features :
Automatic inverter bypass Manual bypass switch Detachable hot-swap PDU Hot swappable UPS power module Hot swappable batteries

Green and high efficiency features :
High efficiency economy mode operation Schedulable daily hours of economy mode operation WARRANTY
2 Years