Cart Empty
Gigabyte R162-Z11 1u Up Amd Epyc 7002 8xddr4
Make an offer
2X1GBE 4XU.2 BAY+ 4X2.5IN BAY/2PSU
1U
Motherboard
MZ12-HD2 CPU
AMD EPYCTM 7002 series processor family
Single processor, 7nm technology
Up to 64-core, 128 threads per processor
TDP up to 225W, cTDP up to 240W
Conditional support 280W
Non-supported NVIDIA Tesla GPU if using 280W CPU
Compatible with AMD EPYCTM 7001 series processor family
Chipset
System on Chip
Memory
8 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200 MHz
LAN
2 x 1GbE LAN ports (1 x Intel I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp
Audio
-
Storage
6 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
4 x 2.5" NVMe hot-swappable SSD bays
SAS card is required for SAS devices support
Backplane JP_SEL switch set from "00010" to "00000" (all OFF) if SAS RAID crad is installed
SAS
-
RAID
-
Peripheral Drives
-
Expansion Slots
Riser Card CRSH01D:
- 1 x PCIe x16 slot (Gen4 x16), Low profile half-length
Riser Card CRS1060:
- 2 x PCIe x16 slots (Gen3 x16), Low profile half-length
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4)
1 x onboard M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 155W if using M.2 device
NOTE: - Support is not provided for mixed GPU populations
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x TPM header
1 x OCP 2.0 mezzanine slot
1 x Front panel header
1 x Back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O
1 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID LED
Backplane I/O
Backplane P/N: 9CBP10A1NR-00
Speed and bandwidth:
10 x ports for PCIe x4
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply
2 x 1200W redundant PSUs
80 PLUS Platinum
AC input:
- 100-240V/ 12-7A, 50-60Hz
- 200-240V/ 7A, 50-60Hz
DC output:
- 1200W
- 12V, 80.5A (100-240V)
- 12V, 97A (200-240V)
- 12Vsb, 3A
System Management
Aspeed AST2500 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Dashboard
JAVA Based Serial Over LAN
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup and Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings
Motherboard
MZ12-HD2 CPU
AMD EPYCTM 7002 series processor family
Single processor, 7nm technology
Up to 64-core, 128 threads per processor
TDP up to 225W, cTDP up to 240W
Conditional support 280W
Non-supported NVIDIA Tesla GPU if using 280W CPU
Compatible with AMD EPYCTM 7001 series processor family
Chipset
System on Chip
Memory
8 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200 MHz
LAN
2 x 1GbE LAN ports (1 x Intel I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp
Audio
-
Storage
6 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
4 x 2.5" NVMe hot-swappable SSD bays
SAS card is required for SAS devices support
Backplane JP_SEL switch set from "00010" to "00000" (all OFF) if SAS RAID crad is installed
SAS
-
RAID
-
Peripheral Drives
-
Expansion Slots
Riser Card CRSH01D:
- 1 x PCIe x16 slot (Gen4 x16), Low profile half-length
Riser Card CRS1060:
- 2 x PCIe x16 slots (Gen3 x16), Low profile half-length
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4)
1 x onboard M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 155W if using M.2 device
NOTE: - Support is not provided for mixed GPU populations
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x TPM header
1 x OCP 2.0 mezzanine slot
1 x Front panel header
1 x Back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O
1 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID LED
Backplane I/O
Backplane P/N: 9CBP10A1NR-00
Speed and bandwidth:
10 x ports for PCIe x4
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply
2 x 1200W redundant PSUs
80 PLUS Platinum
AC input:
- 100-240V/ 12-7A, 50-60Hz
- 200-240V/ 7A, 50-60Hz
DC output:
- 1200W
- 12V, 80.5A (100-240V)
- 12V, 97A (200-240V)
- 12Vsb, 3A
System Management
Aspeed AST2500 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Dashboard
JAVA Based Serial Over LAN
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup and Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- GIGABYTE
- R162-Z11
- New
- 45.00lbs
- 39 X 10 X 24
- Jun 28, 2024
- Sep 09, 2020
Request For Quote.
Gigabyte R162-Z11 1u Up Amd Epyc 7002 8xddr4