Tripp APS2012SW , Powerverter, Aps, 120v, 2000w, Invertercharger, Pure Sine Wave Output

Intended Application
Emergency Home Power, Auxillary Vehicle power, UPS backup

OUTPUT
Frequency compatibility60 Hz
Output watts:2000
Continuous output capacity (watts) :2000
Peak output capacity (watts) :4000
Output nominal voltage:120V Output voltage regulation:
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 120 VAC (+/-5%).
Output frequency regulation:50 Hz (+/- 0.3 Hz)
Overload protection:Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity / type:Hardwire INPUT
Recommended Electrical Service:
DC INPUT: Requires 12VDC input source capable of delivering 120A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Maximum input amps / watts:DC INPUT: Full continuous load - 120A at 12VDC. AC INPUT: 17 amps at 120VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) Input connection type:DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage compatibility (VAC) :120
Voltage compatibility (VDC) :12 BATTERY
Expandable battery runtime:Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) :12
Battery Pack Accessory (optional) :98-121 sealed lead acid battery (optional)
Battery recharge rate:Selectable 8/80 amp VOLTAGE REGULATION
Brownout correction:Brownout transfer point - 170V (+/- 3%)
Severe brownout correction:Brownout reset point - 180V (+/- 3%) LEDS ALARMS and SWITCHES
Alarms:Audible Status indicators (see manual)
Switches:The inverter provides an RJ-45 port for optional APSRMSW retmote control. RJ-45 port operates with standard RS-485 interface (APSRMSW sold separately) Front panel LEDs:Display inverter status, charger status as well as bettery voltage status
Cooling method
Multi-speed fan
Material of construction
Powder coated steel
Receptacle Color
Gray
Style
Heavy-duty with built-in battery charger
Form factors supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) LINE / BATTERY TRANSFER
Transfer time from line power to battery mode:8-12 milliseconds
Low voltage transfer to battery power:In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual) High voltage transfer to battery power:In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual)

SPECIAL FEATURES
Appearance:gray color
Load Sensing:150W - 220W
Remote control capability:Yes Item Dimension (L"xW"xH"):
25.8 x 11.75 x 12.6

Weight:
55.6 lb

Warranty Information:
NA