Tripp SMC15002URM Ups Smart 1500va 1000w Lcd Pure Sine Wave Avr Usb 2urm - 2u Racktower - 6.50 Minute Stand-by - 120 V Ac Input - 120 V Ac Output - 8 X Nema 5-15r - Taa Compliant

OUTPUT
Output Volt Amp Capacity (VA):1500
Output kVA Capacity (kVA):1.5
Output Watt Capacity (Watts):1000
Output kW Capacity (kW):1.0
Nominal Output Voltage(s) Supported:110V 115V 120V
Nominal Voltage Details:120v nominal output in battery mode
Frequency Compatibility:60 Hz
Output Voltage Regulation (Line Mode):-21%, +8%
Output Voltage Regulation (Battery Mode):+/- 5%
Output Receptacles:(8) 5-15R
Output AC Waveform (AC Mode):Sine wave
Output AC Waveform (Battery Mode):Pure Sine wave
INPUT
Rated input current (Maximum Load):12A
Nominal Input Voltage(s) Supported:120V AC
UPS Input Connection Type:5-15P
Input Circuit Breakers:15A
UPS Input Cord Length (ft.):10
UPS Input Cord Length (m):3.0
Recommended Electrical Service:15A 120V
Input Phase:Single-Phase
BATTERY
Full Load Runtime (min.):6.5 min. (1000w)
Half Load Runtime (min.):17.7 min. (500w)
DC System Voltage (VDC):36
Battery Recharge Rate (Included Batteries):Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge:RBC93-2U
Battery Access:Front panel battery access door
Battery Replacement Description:Hot-swappable, user replaceable batteries
Expandable Runtime:No
VOLTAGE REGULATION
Voltage Regulation Description:Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction:Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction:Input voltages between 83 and 107 are boosted by 14%
USER INTERFACE, ALERTS CONTROLS
Front Panel LCD Display:Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches:3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation:Power-fail alarm can be temporarily silenced using alarm-cancel switch silent mode alarm configuration option available
Audible Alarm:Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating:570
UPS AC Suppression Response Time:Instantaneous
EMI / RFI AC Noise Suppression:Yes
PHYSICAL
Included Mounting Accessory Description:Includes UPSHDEARKIT for 2 point front-mount and 2 point center-mount rackmount installation in 2 and 4 post racks, plus wallmount installation
Installation Form Factors Supported with Optional Accessories:4 post rackmount(4POSTRAILKIT) Tower(2-9USTAND) Wallmount(2POSTRMKITWM)
Primary Form Factor:Rackmount
UPS Power Module Dimensions (hwd, cm):8.76 x 43.94 x 34.16
Rack Height (U Spaces):2
Minimum Required Rack Depth (cm):41.91
UPS Power Module Weight (kg):21.09
UPS Shipping Dimensions (hwd / cm):22.35 x 50.80 x 59.69
Shipping Weight (kg):26.6
Cooling Method:Fan
UPS Housing Material:Steel
Minimum Required Rack Depth (mm):419
Primary UPS Height (mm):88
Primary UPS Width (mm):439
Primary UPS Depth (mm):342
Shipping Height (mm):224
Shipping Width (mm):508
Shipping Depth (mm):597
ENVIRONMENTAL
Operating Temperature Range:+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range:+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity:0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load):223
Battery Mode BTU / Hr. (Full Load):650
AC Mode Efficiency Rating (100% Load):94%
Operating Elevation (ft.):0-3000M (0-10,000 Ft)
Audible Noise:45 dBA max at 1m frontside
Operating Elevation (m):0 - 3000 m
COMMUNICATIONS
Communications Interface:DB9 Serial EPO (emergency power off) USB
Network Monitoring Port Description:Supports detailed monitoring of UPS and site power conditions
PowerAlert Software:For local monitoring via the UPSs built-in communication ports, download PowerAlert Local software at
http://www.tripplite.com/poweralert
Communications Cable:USB cabling included
WatchDog Compatibility:Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility:NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.htmlmanufacturerTripp Lite
LINE / BATTERY TRANSFER
Transfer Time:5 milliseconds (AC to battery), 1 milliseconds (Battery to AC)
Low Voltage Transfer to Battery Power (Setpoint):83
High Voltage Transfer to Battery Power (Setpoint):147
SPECIAL FEATURES
Grounding Lug:Back panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure):Cold-start operation supported
High Availability UPS Features:Hot swappable batteries
CERTIFICATIONS
UPS Certifications:Meets FCC Part 15 Category A (EMI) Tested to CSA (Canada) Tested to NOM (Mexico) Tested to UL1778 (USA)
Item Dimension (L inchxW inchxH inch)
24 x 20 x 9 Weight
46.50lb Warranty Information
2-year warranty