Cart Empty
Gigabyte H281-PE0 H281-pe0 Four Node Dual Lga3647 Intel C621 Ddr4 V3gbe 2u Rackmount Server Barebone System
Make an offer
Gigabyte H281-PE0 H281-pe0 Four Node Dual Lga3647 Intel C621 Ddr4 V3gb
Motherboard
MH81-LM0 CPU
2nd Generation Intel Xeon Scalable and Intel Xeon Scalable Processors
Intel Xeon Platinum Processor, Intel Xeon Gold Processor, Intel Xeon Silver Processor and Intel Xeon Bronze Processor
CPU TDP up to 165W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable Socket
Per Node:
2 x LGA 3647
Total:
8 x LGA 3647
Socket P Chipset
Intel C621 Express Chipset Memory
Per node:
24 x DIMM slots
Total:
96 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel Optane DC Persistent Memory (DCPMM)
1.2V modules: 2933/2666/2400/2133 MHz
NOTE:
1. 2933MHz for 2nd Generation Intel Xeon Scalable Processors only
2. Intel Optane DC Persistent Memory for 2nd Generation Intel Xeon Scalable Processors only LAN
Per node:
2 x 10Gb/s BASE-T LAN ports (Intel X550-BT2)
1 x Dedicated management port
Total:
8 x 10Gb/s BASE-T LAN ports (Intel X550-BT2)
4 x Dedicated management ports
1 x 10/100/1000 CMC global management port
CMC: Chassis Management Controller, to monitor all status of computing nodes. Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp, DDR4 SDRAM
Management chip in CMC board:
Integrated in Aspeed AST1250 Audio
- Storage
Per node:
2 x 2.5" 7mm SATA/SAS hot-swappable HDD/SSD bays
Total:
8 x 2.5" 7mm SATA/SAS hot-swappable HDD/SSD bays
SAS card is required for SAS devices support RAID
Intel SATA RAID 0/1 Peripheral Drives
- Expansion Slots
Per node:
- Front side:
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
1 x OCP mezzanine slot with PCIe Gen3 x16 bus
- Rear side:
2 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2280 cards
Total:
- Front side:
4 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
4 x OCP mezzanine slots with PCIe Gen3 x16 bus
- Rear side:
8 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
4 x M.2 slots:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2280 cards Internal I/O
Per node:
4 x SlimSAS connectors
1 x SATA III 6Gb/s port
1 x TPM header
1 x VROC connector
1 x PMBUS header
1 x IPMB connector
1 x Clear CMOS jumper Front I/O
Per node:
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x Power button with LED
1 x ID button with LED
1 x Status LED
1 x NMI button
1 x Reset button
Total:
8 x USB 3.0
4 x VGA
8 x RJ45
4 x MLAN
4 x Power button with LED
4 x ID button with LED
4 x Status LED
4 x NMI button
4 x Reset button Rear I/O
CMC module:
1 x MLAN
1 x MLAN Cascade Port
1 x Status LED
1 x Power on LED
Expansion module:
1 x Power on LED Backplane I/O
Per node:
2 x SAS/SATA ports TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010 Power Supply
2 x 2200W redundant PSUs
80 PLUS Platinum
AC Input:
- 100-127V/ 14A, 47-63Hz
- 200-240V/ 12.6A, 47-63Hz
DC Output:
- Max 1200W/ 100-127V
+12.12V/ 95.6A
+12Vsb/ 3.5A
- Max 2200W/ 200-240V
+12.12V/ 178.1A
+12Vsb/ 3.5A
NOTE:
The system power supply requires C19 type power cord
2000W 80 PLUS Titanium PSU as an option System Management
Aspeed AST2500 management controller
Avocent MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM and vMedia (HTML5) OS Compatibility
For Skylake processors:
Windows Server 2012 R2 with Update
Windows Server 2016
Windows Server 2019
Red Hat Enterprise Linux 6.9 (x64) or later
Red Hat Enterprise Linux 7.3 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
SUSE Linux Enterprise Server 11.4 (x64) or later
SUSE Linux Enterprise Server 12.2 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later
Ubuntu 16.04.1 LTS (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
VMware ESXi 6.0 Update3 or later
VMware ESXi 6.5 or later
VMware ESXi 6.7 or later
VMware ESXi 7.0 or later
Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.4.0 or later
Citrix Hypervisor 8.0.0 or later
For Cascade Lake processors:
Windows Server 2012 R2 with Update
Windows Server 2016
Windows Server 2019
Red Hat Enterprise Linux 7.6 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
SUSE Linux Enterprise Server 12.3 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
VMware ESXi 6.0 Update3 or later
VMware ESXi 6.5 Update2 or later
VMware ESXi 6.7 Update1 or later
VMware ESXi 7.0 or later
Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.5.0 or later
Citrix Hypervisor 8.0.0 or later
MH81-LM0 CPU
2nd Generation Intel Xeon Scalable and Intel Xeon Scalable Processors
Intel Xeon Platinum Processor, Intel Xeon Gold Processor, Intel Xeon Silver Processor and Intel Xeon Bronze Processor
CPU TDP up to 165W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable Socket
Per Node:
2 x LGA 3647
Total:
8 x LGA 3647
Socket P Chipset
Intel C621 Express Chipset Memory
Per node:
24 x DIMM slots
Total:
96 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel Optane DC Persistent Memory (DCPMM)
1.2V modules: 2933/2666/2400/2133 MHz
NOTE:
1. 2933MHz for 2nd Generation Intel Xeon Scalable Processors only
2. Intel Optane DC Persistent Memory for 2nd Generation Intel Xeon Scalable Processors only LAN
Per node:
2 x 10Gb/s BASE-T LAN ports (Intel X550-BT2)
1 x Dedicated management port
Total:
8 x 10Gb/s BASE-T LAN ports (Intel X550-BT2)
4 x Dedicated management ports
1 x 10/100/1000 CMC global management port
CMC: Chassis Management Controller, to monitor all status of computing nodes. Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp, DDR4 SDRAM
Management chip in CMC board:
Integrated in Aspeed AST1250 Audio
- Storage
Per node:
2 x 2.5" 7mm SATA/SAS hot-swappable HDD/SSD bays
Total:
8 x 2.5" 7mm SATA/SAS hot-swappable HDD/SSD bays
SAS card is required for SAS devices support RAID
Intel SATA RAID 0/1 Peripheral Drives
- Expansion Slots
Per node:
- Front side:
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
1 x OCP mezzanine slot with PCIe Gen3 x16 bus
- Rear side:
2 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2280 cards
Total:
- Front side:
4 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
4 x OCP mezzanine slots with PCIe Gen3 x16 bus
- Rear side:
8 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
4 x M.2 slots:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2280 cards Internal I/O
Per node:
4 x SlimSAS connectors
1 x SATA III 6Gb/s port
1 x TPM header
1 x VROC connector
1 x PMBUS header
1 x IPMB connector
1 x Clear CMOS jumper Front I/O
Per node:
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x Power button with LED
1 x ID button with LED
1 x Status LED
1 x NMI button
1 x Reset button
Total:
8 x USB 3.0
4 x VGA
8 x RJ45
4 x MLAN
4 x Power button with LED
4 x ID button with LED
4 x Status LED
4 x NMI button
4 x Reset button Rear I/O
CMC module:
1 x MLAN
1 x MLAN Cascade Port
1 x Status LED
1 x Power on LED
Expansion module:
1 x Power on LED Backplane I/O
Per node:
2 x SAS/SATA ports TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010 Power Supply
2 x 2200W redundant PSUs
80 PLUS Platinum
AC Input:
- 100-127V/ 14A, 47-63Hz
- 200-240V/ 12.6A, 47-63Hz
DC Output:
- Max 1200W/ 100-127V
+12.12V/ 95.6A
+12Vsb/ 3.5A
- Max 2200W/ 200-240V
+12.12V/ 178.1A
+12Vsb/ 3.5A
NOTE:
The system power supply requires C19 type power cord
2000W 80 PLUS Titanium PSU as an option System Management
Aspeed AST2500 management controller
Avocent MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM and vMedia (HTML5) OS Compatibility
For Skylake processors:
Windows Server 2012 R2 with Update
Windows Server 2016
Windows Server 2019
Red Hat Enterprise Linux 6.9 (x64) or later
Red Hat Enterprise Linux 7.3 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
SUSE Linux Enterprise Server 11.4 (x64) or later
SUSE Linux Enterprise Server 12.2 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later
Ubuntu 16.04.1 LTS (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
VMware ESXi 6.0 Update3 or later
VMware ESXi 6.5 or later
VMware ESXi 6.7 or later
VMware ESXi 7.0 or later
Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.4.0 or later
Citrix Hypervisor 8.0.0 or later
For Cascade Lake processors:
Windows Server 2012 R2 with Update
Windows Server 2016
Windows Server 2019
Red Hat Enterprise Linux 7.6 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
SUSE Linux Enterprise Server 12.3 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
VMware ESXi 6.0 Update3 or later
VMware ESXi 6.5 Update2 or later
VMware ESXi 6.7 Update1 or later
VMware ESXi 7.0 or later
Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.5.0 or later
Citrix Hypervisor 8.0.0 or later
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- GIGABYTE
- H281-PE0
- New
- 70.00lbs
- 5 X 5 X 5
- Dec 05, 2024
- Jul 23, 2019
Request For Quote.
Gigabyte H281-PE0 H281-pe0 Four Node Dual Lga3647 Intel C621 Ddr4 V3gbe 2u Rackmount Server Barebone System