Supermicro MBD-X10SDV-16C+-TLN4F-O Motherboard Mbd-x10sdv-16c+-tln4f-o Xeon D-1587 Ddr4 Sata Pci Express Mini-itx Brown Box

Form Factor
Mini-ITX Processor/Cache
CPU:
- Intel Xeon processor D-1587
- FCBGA 1667 supported
- CPU TDP support 65W, 24MB, 16 Cores, 32 Threads System Memory
Memory Capacity:
- 4x DDR4 DIMM sockets
- Supports up to 128GB DDR4 ECC RDIMM
- Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 32GB, 16GB, 8GB, 4GB
Memory Voltage: 1.2 V
Error Detection:
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory) On-Board Devices
Chipset: System on Chip
SATA: SoC controller for 6 SATA3 (6Gbps) ports RAID 0,1,5,10 RSTe
Network Controllers:
- Dual LAN via Intel i350-AM2 Gigabit Ethernet
- Dual LAN via SoC 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1 Realtek RTL8201N PHY (dedicated IPMI)
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: Aspeed AST2400
TPM: TPM header Input / Output
SATA: 6 SATA3 (6Gbps) ports
LAN:
- 2 RJ45 10GBase-T ports
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB:
- 2 USB 3.0 ports (rear)
- 4 USB 2.0 ports (via headers)
Video: 1 VGA port
Serial Port / Header: 1 COM port (header)
DOM: 1 SuperDOM (Disk on Module) power connector Expansion Slots
PCI-Express: 1 PCI-E 3.0 x16 slot
M.2:
- Interface: PCI-E 3.0 x4
- Form Factor: M Key 2242/2280
- Support SATA devices System BIOS
BIOS: 128Mb SPI Flash with AMI BIOS
BIOS Features:
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.8
- UEFI 2.4
- RTC (Real Time Clock) Wakeup Management
Software:
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SUM
- SuperDoctor 5
- Watch Dog
Power Configurations:
- ACPI / APM Power Management
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery PC Health Monitoring
Voltage: Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control
FAN:
- Total of three 4-pin fan headers supporting tachometer status monitoring
- Dual Cooling Zone
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
LED: CPU / System Overheat LED
Other Features:
- Chassis intrusion detection
- Chassis intrusion header
- 12V DC or ATX Power Source
- RoHS Operating Environment
Operating Temperature Range: 0^oC - 60^oC (32^oF - 140^oF) Item Dimension (L"xW"xH")
7 x 7 x 2 Weight
3.00 LBS Warranty Information
1 Year