Received! Our sales team will contact you soon.

Tripp SM2200RMDVTAA , Ups, Smartpro 2200va, 120v And 230v, 1920w, 3u, Avr, 4 X 5-1520r Outlets, Usb, Db9

Make an offer
3 Available

Special Price $1912.80 Regular Price $2582.28

Condition: New
Tripp Lite
TRIPP LITE
Free Shipping for this Item


Tripp Lite UPS Smart 2200VA 1920W Rackmount AVR 120V / 230V Pure Sine Wave 3URM TAA GSA - 2200 VA/1920 W - 120 V AC -

OUTPUT
Output Volt Amp Capacity (VA):2200
Output kVA capacity (kVA):2.2
Output Watt Capacity (watts):1920
Output kW capacity:1.92
Output power factor:0.87
Nominal Output Voltage(s) Supported:120V
Frequency compatibility:50 / 60 Hz
Frequency compatibility details:Auto-sensing
Output voltage regulation (Battery mode)+/- 5%
Built-in UPS output receptacles:4 5-15R outlet(s) 4 5-15/20R outlet(s) Built-in controllable switched load banksTwo switchable single-outlet 5-15R load banks
Basic PDU options:PDU1220 (1U / 13 5-15/20R outlets) PDUNV (1U / 2 C19, 12 C13 outlets) PDUV20 (0U / 12 5-15/20R outlets) PDU40TDUAL (0U / 40 5-15/20R outlets)
Metered PDU options:PDUMH20 (1U / 13 5-15/20R outlets) PDUMH20AT (1U / 16 5-15/20R outlets) PDUMV20 (0U / 16 5-15/20R outlets) PDUMV40 (0U / 32 5-15/20R outlets)
Monitored PDU options:PDUMNV20 (0U / 24 5-15/20R outlets) PDUMNH20 (1U / 16 5-15/20R outlets)
Switched PDU options:PDUMH20ATNET (1U / 16 5-15/20R outlets) PDUMV20NET (0U / 24 5-15/20R outlets)
External PDU redundancy options:Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS models only
Output AC waveform (AC mode):Sine wave
Output AC waveform (battery mode):Pure Sine wave INPUT
Rated input current (at maximum load):16A (120V), 10A (230V)
Nominal Input Voltage(s) Supported:120V AC 230V AC
UPS input connection type:5-20P C20 inlet
UPS input connection description:C20 inlet and 5 compatible plugsets (5-20P, Schuko CEE7, EU1-16P, British BS1363, Italian CEI 23-16)
Input circuit breaker:20A
UPS Input cord length (ft.):6
UPS Input cord length (m):1.8 BATTERY
Full load runtime (minutes):12 minutes (1920 watts)
Half load runtime (minutes):30 minutes (960 watts)
Expandable battery runtime:Extended runtime supported via optional external battery packs
External battery pack compatibility:BP48V24-2U (limit 1) BP48V60RT-3U (multi-pack compatible)
DC system voltage (VDC):48
Battery recharge rate (included batteries):Less than 4.5 hours from 10% to 90% (internal batteries)
Replacement battery cartridge (internal UPS battery replacement):RBC49-DV (quantity 2 required)
Battery Access:Front panel battery access door
Battery replacement description:Hot-swappable, user replaceable batteries VOLTAGE REGULATION
Voltage regulation description:Automatic voltage regulation (AVR) maintains 120v line power output with input range of 89 to 148 or 170 to 286
Overvoltage correction:Voltage reduction of 12% applies when input is between 127 and 148 (120V)
Undervoltage correction:Voltage boost of 12% applies when input voltage is between 96 and 108 (120V) LEDS ALARMS and SWITCHES
LED Indicators:5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms:Audible alarm indicates power-failure, overload and low-battery conditions Alarm cancel operation:Power-fail alarm can be silenced using alarm-cancel switch once silenced, alarm will re-
sound to indicate low-battery status
Switches:2 Switches control off/on power status and alarm-cancel/self-test operation rear panel protected switches support nominal voltage selection SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating:340
UPS AC suppression response time:Instantaneous
EMI / RFI AC noise suppression:Yes

COMMUNICATIONS
Communications interface:USB (HID enabled) DB9 Serial EPO (emergency power off) Slot for SNMP/Web interface
Network monitoring port description:Supports detailed monitoring of UPS and site power conditions
PowerAlert software:Included
Communications cable:USB and DB9 cabling included
WatchDog compatibility:Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER
Transfer time:2-4 milliseconds
Low voltage transfer to battery power (setpoint):89 (120V), 170 (230V)
High voltage transfer to battery power (setpoint):148 (120V), 286 (230V)

CERTIFICATIONS
UPS Certifications:Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category A (EMI) ROHS (Restriction of Hazardous Substances) TAA Compliant Item Dimension (L"xW"xH"):
11.5 x 29.5 x 30.5

Weight:
159.5 lb

Warranty Information:
2 Years
  • Manufacturer:
  • Model Number:
  • Condition:
  • Weight:
  • Dimensions:
  • Updated:
  • Added:
  • Country of Origin:
  • Tripp Lite
  • SM2200RMDVTAA
  • New
  • 159.50lbs
  • 31 X 12 X 30
  • Today - Dec 22, 2024
  • Mar 01, 2020
  • Taiwan

Request For Quote.


Tripp SM2200RMDVTAA , Ups, Smartpro 2200va, 120v And 230v, 1920w, 3u, Avr, 4 X 5-1520r Outlets, Usb, Db9

Write a Review