Gigabyte R28N-F2O Server R28n-f2o 2u Dual Socket Nvme Rm Server E5-2600v3v4 24x2.5 Inch Hot-swap Retail

Dimensions
2U Motherboard
MD90-FS0 CPU
Intel Xeon E5-2600 V3 processors
Intel Xeon E5-2600 V4 processors
(If only 1 CPU is installed, some PCIe, memory, network or I/O functions might be unavailable.) Socket
2 x LGA 2011-3
Mounting pitch: square ILM (80x80mm)
(Max. length of M4 screw threads: 3.7mm)
(Screws longer than 3.7mm might damage the motherboard) Chipset
Intel C612 Memory
24 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 64GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 1600/1866/2133/2400 MHz LAN
2 x GbE LAN ports (Intel I350-BT2)
1 x 10/100/1000 management LAN Video
Integrated in Aspeed AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp Audio
- Storage
4 x 2.5 inch hot-swappable NVMe bays
20 x 2.5 inch hot-swappable SAS/SATA bays
Default configuration supports:
- 4 x NVMe drives (from CNV3114)
- 8 x SATA 6Gb/s drives (from Intel C612 chipset)
(SAS or SATA card required to enable the remaining drive bays) SATA
2 x Mini-SAS (for 8 x SATA III 6Gb/s ports)
2 x SATA III 6Gb/s ports SAS
- RAID
- Peripheral Drives
- Expansion Slots
8 x Full-height half-length slots
1 x PCIe mezzanine type T (Gen3 x8 bus) slot
3 x riser cards:
- 1 x CRS2120
- 1 x CRS2121
- 1 x CRS2140 Internal I/O
1 x 14-pin ATX main power connector
3 x 8-pin ATX 12V power connectors
3 x 4-pin ATX 12V power connectors
2 x Mini-SAS ports
2 x SATA III 6Gb/s ports
2 x CPU fan headers
5 x System fan headers
1 x USB 3.0 header
1 x Front panel header
1 x HDD back plane board header
1 x Chassis intrusion header
1 x PLD header
1 x TPM header
1 x JTAG header
1 x ME update jumper
1 x ME recovery jumper
1 x Clear CMOS jumper
1 x S3 mask jumper
1 x BMC RFB jumper
1 x IPMB connector Front I/O
1 x Power button with LED
1 x ID button with LED
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
1 x Reset button Rear I/O
2 x USB 3.0
2 x USB 2.0
3 x RJ45
1 x VGA
1 x Serial
1 x ID button with LED Backplane I/O
24 x SAS/SATA ports
Default configuration supports:
- 4 x NVMe drives (from CNV3114)
- 4 x SATA/SAS drives (from Intel C612 chipset)
(HBA card required to enable the remaining drive bays) TPM
1 x TPM header