Supermicro MBD-H8QG7+-LN4F-O Motherboard Mbd-h8qg7+-ln4f-o Quad Amd Opteron 6000 Series G34 Swtx Brown Box

Form Factor
SWTX Processor/Chipset
CPU:
- Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron 6000 Series processors
- HT3.0 Link support
Chipset: AMD SR5690 / SP5100 Chipset System Memory
Memory Capacity:
- 32 DIMM sockets
- Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
Memory Type: Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.35V or 1.5V
Error Detection:
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory) On-Board Devices
SATA: AMD SP5100 (RAID 0, 1, 10)
SAS:
- LSI 2208 8-port 6 Gbps SAS2 controller via 2x iPass connectors
- HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache)
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond WPCM450 BMC
Network Controllers:
- Intel I350 controller, 4-Port Gigabit Ethernet
- 10/100/1000BASE-T support
VGA: Matrox G200eW 16MB DDR2 graphics
Super I/O: Winbond W83527 chip Input / Output
SATA: 6x SATA2.0 (3Gb/s) Ports
SAS: SAS2 x8
LAN:
- 4 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
USB:
- 7x USB 2.0 ports
- 2x Rear, 2x internal headers-4x ports, and 1x type A
VGA: 1x VGA port
Serial Ports: 1x serial port header
IPMI: 1x dedicated IPMI LAN port WPCM450
Others: 1 SATA DOM power connector, TPM header Expansion Slots
PCI-Express: 1x PCI-E 2.0 x16 slot Chassis ( Optimized for H8QG7+-LN4F )
1U Chassis: CSE-818TQ-1400LPB (Requires rev. K chassis, air shroud MCP-310-81807-0B)
2U Chassis:
- CSE-828TQ+-R1400LPB (Requires rev. K chassis, air shroud MCP-310-82801-0N)
- CSE-828TQ+-R1K43LPB (Requires rev. K chassis, air shroud MCP-310-82801-0N)
Tower / 4U Rackmount:
- CSE-418E16-R1K62B (Requires air shroud MCP-310-84802-0B)
- CSE-748TQ-R1400B (Requires rev. K chassis, air shroud MCP-310-74802-0B)
- CSE-748TQ-R1K43B (Requires rev. K chassis, air shroud MCP-310-74802-0B)
- CSE-848A-R1K62B(Requires air shroud MCP-310-84802-0B)
- CSE-848E16-R1K62B (Requires air shroud MCP-310-84802-0B)
Note: Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list. System BIOS
BIOS Type: 16Mb SPI Flash ROM with AMI BIOS
BIOS Features:
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3 Management
Software:
- IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
Power Configurations:
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery PC Health Monitoring
CPU:
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
FAN:
- Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
LED:
- CPU / System Overheat LED
- +5V Standby Alert LED
Other Features:
- Chassis Intrusion Detection
- Chassis Intrusion Header RoHS
RoHS Compliant 6/6, Pb Free Environmental Specifications
Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) Regulatory
FCC: Passed to meet FCC standard requirement Item Dimension (L inchxW inchxH inch)
NA Weight
5.00 lb Warranty Information
1 Year