Supermicro MBD-X11SDW-16C-TP13F-B Mb Mbd-x11sdw-16c-tp13f-o Xeon D-2183it S2518 256gb Ddr4 Pcie

Physical Stats
Form Factor
Proprietary WIO

Processor/Cache
CPU
Intel Xeon Processor D-2183IT.
Single Socket FCBGA-2518 supported, CPU TDP support Up to 100W TDP
Cores / Cache
16 cores, 32 threads

System Memory
Memory Capacity
Up to 256GB Registered ECC RDIMM, DDR4-2400MHz, Up to 512GB LRDIMM LRDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type
2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM
(Operating speed up to 2133MHz)
DIMM Sizes
8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors

On-Board Devices
Chipset
System on Chip
SATA
SoC controller for 4 SATA3 (6 Gbps) ports, RAID 0,1,5,10
IPMI
ASPEED AST2500
Support for Intelligent Platform Management Interface v.2.0
Network Controllers
Quad LAN with Intel Ethernet Controller I350-AM4
Quad LAN with 1GbE with Inte I350-AM4
Dual LAN with 10G SFP+ LAN via SoC
Dual LAN with 10Gbase-T
Single LAN with 1GbE with Intel I210
Total 13 LAN ports
Single LAN with Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Aspeed AST2500 BMC
Header Only

Input / Output
SATA
4 SATA3 ports via SoC controller
LAN
9 RJ45 Gigabit Ethernet LAN ports
2 RJ45 10GBase-T ports
2 10G SFP+ LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
4 USB 2.0 ports (4 headers, Type A))
2 USB 3.1 Gen1 ports (2 Rears Type A)
Video Output
1 VGA port,
Header Only
Serial Port / Header
2 COM Ports (1 rear, 1 header)
TPM
1 TPM Header and Chip both

Expansion Slots
PCI-E
1 PCI-E 3.0 x32 Left Riser Slot
M.2
1 M.2 M-Key SATA/PCI-E 3.0 x4, 2280/22110
1 M.2 E-Key PCI-E 3.0 x1, 2230
1 M.2 B-Key SATA/PCI-E 3.0 x2/USB 3.0, 2242

System BIOS
BIOS Type
UEFI 256Mb
BIOS Features
ACPI 6.1
SMBIOS 3.1
UEFI 2.7
PCI FW 3.2

Management
Software
Intel Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor 5, Watchdog
System Management Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations
+12V DC Power Input
ACPI Power Management
CPU thermal trip support for processor protection

PC Health Monitoring
Voltage
+1.5V, +12V, +3.3V, +5V, +5V standby, 6 -fan status, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature
FAN
6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature
Monitoring for CPU and chassis environment
LED
CPU / System Overheat LED, UID/Remote UID
Other Features
12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL

Operating Environment
Operating Temperature Range
0^oC - 60^oC (32^oF - 140^oF)
Non-Operating Temperature Range
-40^oC - 70^oC (-40^oF - 158^oF)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

Weight
3.00 lb

Warranty Information
1 Year