Tripp UT1250UL , Powerverter, Utilitywork Truck 12vdc Invertercharger, 1250w, 2 5-15r Gfci

OUTPUT
Nominal Output Voltage(s) Supported
120V
Frequency Compatibility
60 Hz
Output Receptacles
(2) 5-15R
Pure Sine Wave Output
No
Output (Watts)
1250
Continuous Output Capacity (Watts)
1250
Peak Output Capacity (Watts)
2500
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%)
Output Frequency Regulation
60 Hz (+/- 0.3Hz)
Overload Protection
Includes 10A input breaker dedicated to the charging system and 12A output breaker for AC output loads.
Outlet Details
2 NEMA 5-15R GFCI protected outlets INPUT
Nominal Input Voltage(s) Supported
120V AC
Recommended Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 127A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended
Maximum Input Amps / Watts
DC INPUT: Full continuous load 127A at 12 VDC. AC INPUT 20 amps at 120 VAC with full inverter and charger load 12A max charge only)
Input Connection Type
DC INPUT: set of two (2) DC bolt-down terminals. AC INPUT: NEMA 5-15R GFCI input plug
Input Cord Length Details
DC INPUT: User supplies cabling. 6 gauge or larger (see manual) AC INPUT: attached 6ft. AC line cord with plug.
Voltage Compatibility (VAC)
120
Voltage Compatibility (VDC)
12 BATTERY
Expandable Battery Runtime
Runtime is expandable with any number of user supplied wet or gel or AGM type batteries
DC System Voltage (VDC)
12
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional)
Battery Charge
10A / 40A (selectable)
Expandable Runtime
Yes USER INTERFACE, ALERTS AND CONTROLS
Front Panel LEDs
Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences
Switches
3 position on / off remote switch enables simple on / off power control plus "auto/ remote" SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating
600 PHYSICAL
Cooling Method
Multi-speed fan
Material of Construction
Polycarbonate
Receptacle Color
White
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface.(see manual for additional mounting information) ENVIRONMENTAL
Relative Humidity
0-95% non-condensing LINE / BATTERY TRANSFER
Transfer Time (Line Power to Battery Mode)
16.6 milliseconds (typical -compatible with many computers, servers and networking equipment -verify transfer time compatibility loads for UPS applications)
Low Voltage Transfer to Battery Power
In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105- see manual)
High Voltage Transfer to Battery Power
In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases to 135V (user adjustable to 145 -see manual) SPECIAL FEATURES
Load Sensing
Load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level. CERTIFICATIONS
Certifications
Tested to UL 458 (USA) and CSA (Canada) Item Dimension (L"xW"xH")
11 x 11 x 13

Weight
26.5 lbs

Warranty Information
30 month limited warranty