Emulex LPE12004-M8 8gb Hba Pcie 4 Port Enterprise Sup

Specifications

• Mfr Part Number: LPE12004-M8
• Features:
  • PCIe 2.0 bus-compliant, with PCIe 1.0 backward compatibility supported
  • Support for Message Signaled Interrupts eXtended (MSI-X), improves host utilization & enhances application performance
  • Support for 8Gbps, 4Gbps and 2Gbps Fibre Channel devices
  • Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual Fabric
  • Host-to-Fabric FC-SP authentication
  • T10 Protection Information (T10 PI) ready - ensures end-to-end data integrity
  • Common driver model allows a single driver to support all Emulex HBAs on a given OS
  • Easy deployment of new firmware with minimal server reboots
  • Efficient centralized administration of Emulex HBAs via powerful management tools
• Standards:
  • ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
  • PCI Express base spec 2.0
  • PCI Express card electromechanical spec 2.0
  • Fibre Channel class 2 and 3
  • PHP hot plug-hot swap
• Architecture:
  • Quad-channel
  • 8Gbps, 4Gbps or 2Gbps FC Link speeds automatically detected
  • Integrated data buffer and code space memory
• Comprehensive OS Support:
  • Windows, Linux, NetWare, Solaris (except DR), VMware
  • Additional support is available from OEMs and partners
  • View OS versions and available drivers
• Hardware Environments: PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family
• Optical:
  • Data Rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)
  • Optics: Short wave lasers with LC type connector
  • Cable: Operating at 8Gbps
    • 50/125 microns (500MHz*km BW)-up to 50m
    • 50/125 microns (2000MHz*km BW)-up to 150m
• Additional Features:
  • Performance Features:
    • Doubling the maximum Fibre Channel link rate from 4Gbps to 8Gbps and enhanced virtualization capabilities help support IT "Green" initiatives
    • Frame-level Multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance
  • Data Protection Features:
    • End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting algorithms ensure data is safe from corruption
  • Deployment and Management Features:
    • Universal Boot capability allows the appropriate boot environment to be automatically selected for any given hardware
    • Boot from SAN capability reduces system management costs and increases uptime
    • Detailed real-time event logging and tracing enables quick diagnosis of SAN problems
    • Beaconing feature flashes the HBA LEDs, simplifying their identification within server racks
    • Environmental monitoring feature helps to optimize SAN availability
• Agency Approvals: FCC Class A; UL/CSA Recognized
• Dimensions: 4.376 x 6.600 inch / 111.55 x 167.64 mm (PCI full-height, half-length form factor card; Standard bracket)
• Power & Environmental Requirements:
  • Volts: +3.3, +12
  • Operating Temperature: 0° to 55°C (32° to 131°F)
  • Storage Temperature: -40° to 70°C (-40° to 158°F)
  • Relative Humidity: 5% to 95% non-condensing
  • 23 Degree C Wet Bulb