Tripp PDU3EVS6L2120 Pdu 3ph Switched 24 C13 6 C19

OVERVIEW
PDU Type
Switched OUTPUT
Output Capacity Details
6.7kW (240V), 5.8kW (208V) total capacity / 9.24A balanced max per outlet bank (L1-L2, L2-L3, L3-L1)
Frequency Compatibility
50 / 60 Hz
Output Receptacles
(24) C13 (6) C19
Output Nominal Voltage
208 240
Overload Protection
n/a
Customized Load Management Receptacles
UPS receptacles that can be individually powered off and back on again via software interface to reboot remote equipment or perform "load shedding" of less critical loads to extend battery runtime for the most critical equipment. Each outlet is individually controllable via remote interface INPUT
PDU Input Voltage
208 240
Recommended Electrical Service
20A 208/240V with NEMA L21-20R outlet
Maximum Input Amps
16
PDU Plug Type
NEMA L21-20P
Input Cord Length (ft.)
6
Input Phase
3-Phase USER INTERFACE, ALERTS AND CONTROLS
Reported Load Segments
Supports monitoring of current per input phase (L1, L2, L3) and output current per load bank (Banks 1-3) Outlets are color-coded and labeled for phase and load bank identification L1-L2 powers black outlets (Bank 1) L2-L3 powers dark-gray outlets (Bank 2) L3-L1 powers light-gray outlets (Bank 3)
Front Panel LCD Display
Touchscreen LCD reports NETWORK DATA (IP address, Subnet Mask, Gateway, MAC Address, Device Name, Model, Serial Number), INPUT PHASE DATA (Amperage, Wattage, Voltage per phase, plus Unbalance percentage), LOAD BANK DATA (Amperage, Wattage, Voltage per load bank, plus total PDU output in watts), CONFIGURATION DATA (Listing of current configuration settings), ENVIRONMENTAL DATA (Reports data and status of E2 sensor modules Sensor options are available for temperature and humidity, plus input and output dry contacts), MOBILE ACCESS (Generates a unique QR code to view reported PDU details on a mobile device)
Front Panel LEDs
One LED for each output receptacle offers power availability information: GREEN (Power ON), YELLOW (Warning condition), RED (Critical condition). Network Activity (Green): Flashes for network activity. Link/Network Speed (Yellow): On steady for any speed.
Switches
LX Platform Interface: Recessed reset switch for interface reboot and factory reset
Current Measurement Accuracy (Amps)
+/-1%
Voltage Measurement Accuracy (Volts)
+/-1%
Power Measurement Accuracy (Watts)
+/-1% PHYSICAL
Material of Construction
Sheet metal
Form Factors Supported
Vertical rackmount installation supported with included mounting brackets supports toolless mounting in button-mount compatible racks
PDU Form Factor
Vertical (0U) ENVIRONMENTAL
Operating Temperature Range
32 to 122F (0 to 50C)
Storage Temperature Range
5 to 140F (-15 to 60C)
Relative Humidity
5 to 95% non-condensing
Operating Elevation (ft.)
0 to 10,000
Operating Elevation (m)
0 - 3000 m COMMUNICATIONS
Communications Interface
Pre-installed network card RS-232 USB
PowerAlert Software
LX Platform Interface: PowerAlert Device Manager 15 (PADM15)
Communications Cable
USB B-to-USB A Configuration/Console Access cable
Network Monitoring Port
RJ45 port that connects to a network for detailed monitoring of UPS and site power conditions. RJ45 Network port, RJ45 Config/Console Access port 2x USB A ports supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules. USB B port (Configuration and Console Access)
SNMP Compatibility
SNMP V1, V2c, V3
Network Speed
10/100 Mbps 1Gbps CERTIFICATIONS
Certifications
Tested to UL60950-1: 2007 R10.14 (USA), CAN/CSA-C22.2 NO. 60950-1-07+A1: 2011+A2: 2014 (Canada), FCC CLASS A PART 15 (Emissions), NOM (Mexico), RoHS compliant, TAA Compliant Item Dimension (L"xW"xH")
76 x 10 x 7

Weight
39 lbs

Warranty Information
2-year limited warranty