Cart Empty
Fsp FSP700-80WEPB Fsp Power Supply Fsp700-80wepb 700w Atx 4cm Fan Apfc 80plus Platinum Bulk
Fsp FSP700-80WEPB Fsp Power Supply Fsp700-80wepb 700w Atx 4cm Fan Apfc
Wattage
700W Product Highlight
Efficiency Level: 80 Plus Platinum
Altitude: 5000M
PMBus: V1.2 General Specification
Effciency: 92% 230VAC
Voltage Regulation: +3.3V, +12V, +5V, +5SB: +/-5%
12V: +/-10% Input Electrical Specification
Input Frequency: 47 to 63 Hz
Input Current:
- 115V at 12.0 Amps-rms maximum
- 230V at 6.0 Amps-rms maximum Output Specification
Hold-up time:
- 115V/60Hz 16mSec. Minimum at 100% Load,
- 230V/50Hz 16mSec. Minimum at 100% Load
Ouput Voltage Regulation:
- +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum
- +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum
- +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum
Ripple and Noise: 115V-rms/230V-rms 5V 20ms Maximum
Over current protection:- 3.3V:50mV p-p
- 5V:50mV p-p
- 12V1:120mV p-p
- 12V2:120mV p-p
- 12V3:120mV p-p
- 12V4:120mV p-p / 12V:120mV p-p
- 5Vsb:50mV p-p Environmental Requirement
Temperature Range:
- Operating : 0 to +50oC
- Storage :-20 to +80oC
Humidity: - Operating: 85% to % RH, Non-condensing
- Storage : 95% to % RH, Non-condensing
MBTF: The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25oC, maximum-output load, and nominal AC inout voltage Safety
CE,FCC,TUV,UL/cUL,CCC Output Voltage and Current Rating(+3.3V/ +5V/ +12V1/ +12V2/ +12V3/ +12V4/ -12V/ +5Vsb)
Ripple-Noise(R-P) mV: 50mV / 50mV / 120mV / 120mV / 120mV / 120mV / 120mV / 50mV
Regulation Load %: +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-10% / +/-5%
Output Max.(A): 25A / 30A / 16A / 16A / 16A / 16A / 0.5A / 4A
Output Min.(A): 0.1A / 1A / 1A / 1A / 1A / 1A / 0A / 0A Notes
- The +3.3V and +5V total output shall not exceed 150 watts.
- The total output shall not exceed 600 watts
- Maximum combined current for the 12V outputs shall be 48A
- Ripple and noise measurements shall be made under all specified load conditions through a singple pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading. Item Dimension (L inchxW inchxH inch)
11 x 4 x 3
Weight
5.60 lb
Warranty Information
3 Years
700W Product Highlight
Efficiency Level: 80 Plus Platinum
Altitude: 5000M
PMBus: V1.2 General Specification
Effciency: 92% 230VAC
Voltage Regulation: +3.3V, +12V, +5V, +5SB: +/-5%
12V: +/-10% Input Electrical Specification
Input Frequency: 47 to 63 Hz
Input Current:
- 115V at 12.0 Amps-rms maximum
- 230V at 6.0 Amps-rms maximum Output Specification
Hold-up time:
- 115V/60Hz 16mSec. Minimum at 100% Load,
- 230V/50Hz 16mSec. Minimum at 100% Load
Ouput Voltage Regulation:
- +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum
- +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum
- +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum
Ripple and Noise: 115V-rms/230V-rms 5V 20ms Maximum
Over current protection:- 3.3V:50mV p-p
- 5V:50mV p-p
- 12V1:120mV p-p
- 12V2:120mV p-p
- 12V3:120mV p-p
- 12V4:120mV p-p / 12V:120mV p-p
- 5Vsb:50mV p-p Environmental Requirement
Temperature Range:
- Operating : 0 to +50oC
- Storage :-20 to +80oC
Humidity: - Operating: 85% to % RH, Non-condensing
- Storage : 95% to % RH, Non-condensing
MBTF: The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25oC, maximum-output load, and nominal AC inout voltage Safety
CE,FCC,TUV,UL/cUL,CCC Output Voltage and Current Rating(+3.3V/ +5V/ +12V1/ +12V2/ +12V3/ +12V4/ -12V/ +5Vsb)
Ripple-Noise(R-P) mV: 50mV / 50mV / 120mV / 120mV / 120mV / 120mV / 120mV / 50mV
Regulation Load %: +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-10% / +/-5%
Output Max.(A): 25A / 30A / 16A / 16A / 16A / 16A / 0.5A / 4A
Output Min.(A): 0.1A / 1A / 1A / 1A / 1A / 1A / 0A / 0A Notes
- The +3.3V and +5V total output shall not exceed 150 watts.
- The total output shall not exceed 600 watts
- Maximum combined current for the 12V outputs shall be 48A
- Ripple and noise measurements shall be made under all specified load conditions through a singple pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading. Item Dimension (L inchxW inchxH inch)
11 x 4 x 3
Weight
5.60 lb
Warranty Information
3 Years
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- FSP Group
- FSP700-80WEPB
- New
- 5.20lbs
- 10 X 3 X 4
- Jun 28, 2024
- Dec 23, 2016
Request For Quote.
Fsp FSP700-80WEPB Fsp Power Supply Fsp700-80wepb 700w Atx 4cm Fan Apfc 80plus Platinum Bulk