Cart Empty
Thermaltake CL-W233-PL12SW-B Accessory Cl-w233-pl12sw-b 240mm Water 3.0 Argb Sync Retail
Out of Stock
Special Price $173.03 Regular Price $233.59
Condition: New
Special Price $173.03 Regular Price $233.59
Condition: New
Thermaltake CL-W233-PL12SW-B Accessory Cl-w233-pl12sw-b 240mm Water 3.
All-in-one 240mm liquid cooler with PWM fan that supports 5V RGB capable motherboards.
WATER 3.0 ARGB 240
The Water 3.0 ARGB Sync CPU cooler, is an all-in-one cooling solution that is available in either 120mm, 240mm or 360mm variants. Able to provide an alternative cooling solution to standard air cooling, the Water 3.0 is a perfect fit for achieving higher performance in any system.
Its also a fantastic choice for those that cant get enough RGB lighting in their build; thanks to the included Pure ARGB 5 volt radiator fans, switching between different lighting effects and colour options has never looked this good.
KEEPING COOL UNDER PRESSURE
When it comes to optimizing PC performance, keeping your components cool should always be a priority. A CPU is the beating heart of any gaming system, and is always going to require the best cooling hardware in order to help support it. By utilizing an all-in-one liquid cooler such as the Water 3.0, the truest potential of your CPU can be fully realized.
Over-clocking is something that can only be achieved through a liquid cooling solution, allowing your system to achieve even higher performance targets. You can also rest easy knowing that when you use the Water 3.0, it will help in eliminating any risks of damage to your hardware that can sometimes cause due to inefficient cooling be applied from stock cooling methods.
HASSLE-FREE INSTALLATION
Implementing a new cooler is easier than you think. The Water 3.0 is both simple and straightforward when it comes to implementing it into your system. A lot of the work is already done for you, with thermal paste already pre-applied on the base of the waterblock to allow for stress free placement.
PUMP
Motor Speed: 3600 RPM
Rated Voltage: 12 V and 5V
Power Input: 12V - 3.9 W , 5V - 1.06 W
WATER BLOCK
Material: Copper
FAN
Speed: PWM 500 to 1500 R.P.M (2510-4PIN)
Noise Level: 25.8 dB-A
Rated Voltage: 12 V and 5V
Power Input: 12V- 1.44 W, 5V - 1.6W (one fan)
Max. Air Flow: 56.45 CFM
Max. Pressure: 1.59 mm-H2O
LED Control: ARGB controller or 5V addressable RGB header on motherboard
TUBE
Length: 326mm
Material: Rubber
RADIATOR
Dimension: 270 x 120 x 27 mm
COMPATIBILITY
Intel
LGA 2066/20113/2011/1366/1156/1155/1151/1150
AMD
TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
Item Dimension (L inchxW inchxH inch)
14 x 6 x 10
Weight
7.00 lb
Warranty Information
3 years warranty
WATER 3.0 ARGB 240
The Water 3.0 ARGB Sync CPU cooler, is an all-in-one cooling solution that is available in either 120mm, 240mm or 360mm variants. Able to provide an alternative cooling solution to standard air cooling, the Water 3.0 is a perfect fit for achieving higher performance in any system.
Its also a fantastic choice for those that cant get enough RGB lighting in their build; thanks to the included Pure ARGB 5 volt radiator fans, switching between different lighting effects and colour options has never looked this good.
KEEPING COOL UNDER PRESSURE
When it comes to optimizing PC performance, keeping your components cool should always be a priority. A CPU is the beating heart of any gaming system, and is always going to require the best cooling hardware in order to help support it. By utilizing an all-in-one liquid cooler such as the Water 3.0, the truest potential of your CPU can be fully realized.
Over-clocking is something that can only be achieved through a liquid cooling solution, allowing your system to achieve even higher performance targets. You can also rest easy knowing that when you use the Water 3.0, it will help in eliminating any risks of damage to your hardware that can sometimes cause due to inefficient cooling be applied from stock cooling methods.
HASSLE-FREE INSTALLATION
Implementing a new cooler is easier than you think. The Water 3.0 is both simple and straightforward when it comes to implementing it into your system. A lot of the work is already done for you, with thermal paste already pre-applied on the base of the waterblock to allow for stress free placement.
PUMP
Motor Speed: 3600 RPM
Rated Voltage: 12 V and 5V
Power Input: 12V - 3.9 W , 5V - 1.06 W
WATER BLOCK
Material: Copper
FAN
Speed: PWM 500 to 1500 R.P.M (2510-4PIN)
Noise Level: 25.8 dB-A
Rated Voltage: 12 V and 5V
Power Input: 12V- 1.44 W, 5V - 1.6W (one fan)
Max. Air Flow: 56.45 CFM
Max. Pressure: 1.59 mm-H2O
LED Control: ARGB controller or 5V addressable RGB header on motherboard
TUBE
Length: 326mm
Material: Rubber
RADIATOR
Dimension: 270 x 120 x 27 mm
COMPATIBILITY
Intel
LGA 2066/20113/2011/1366/1156/1155/1151/1150
AMD
TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
Item Dimension (L inchxW inchxH inch)
14 x 6 x 10
Weight
7.00 lb
Warranty Information
3 years warranty
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- Thermaltake
- CL-W233-PL12SW-B
- New
- 7.00lbs
- 0 X 0 X 0
- Dec 05, 2024
- Oct 29, 2021
Request For Quote.
Thermaltake CL-W233-PL12SW-B Accessory Cl-w233-pl12sw-b 240mm Water 3.0 Argb Sync Retail
