Cart Empty
Tripp APS1012SW , Powerverter, Aps, 120v, 1000w, Invertercharger, Pure Sine Wave Output
Make an offer
Out of Stock
Special Price $570.93 Regular Price $770.76
Condition: New
Special Price $570.93 Regular Price $770.76
Condition: New
Tripp APS1012SW , Powerverter, Aps, 120v, 1000w, Invertercharger, Pure
OUTPUT
Frequency compatibility:60 Hz
Output watts:1000
Continuous output capacity (watts) :1000
Peak output capacity (watts) :2000
Output nominal voltage:120V Output voltage regulation:
LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC): Maintains sine wave output voltage of 120-150VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)
Output frequency regulation:60 Hz (+/- 0.3 Hz)
Overload protection:
Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity / type:Hardwire INPUT
Recommended Electrical Service:
DC INPUT: Requires 12VDC input source capable of delivering 120A for the required duration (when used at full continuous capacity). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. A
Maximum input amps / watts:
DC INPUT: Full continuous load - 120A at 12VDC. AC INPUT: 15 amps at 120VAC with full inverter and charger load. Input connection type:DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire
Voltage compatibility (VAC) :120
Voltage compatibility (VDC) :12 BATTERY
Expandable battery runtime:
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) :12
Battery recharge rate:
Includes 4/40 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries. LEDS ALARMS and SWITCHES
Alarms:Audible status indicators
Switches:The inverter provides a RJ-45 port for optional APSRMSW remote control. RJ45 port operates with standard RJ485 interface (APSRMSW sold separately) Front panel LEDs:Set of front panel LEDs display inverter status, charger status, as well as battery voltage status
Cooling method:
Fan
Material of construction:
Powder coated Steel
Form factors supported:
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Appearance:
gray color Item Dimension (L"xW"xH"):
21.47 x 13 x 12.6
Weight:
36.37 lb
Warranty Information:
NA
Frequency compatibility:60 Hz
Output watts:1000
Continuous output capacity (watts) :1000
Peak output capacity (watts) :2000
Output nominal voltage:120V Output voltage regulation:
LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC): Maintains sine wave output voltage of 120-150VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)
Output frequency regulation:60 Hz (+/- 0.3 Hz)
Overload protection:
Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity / type:Hardwire INPUT
Recommended Electrical Service:
DC INPUT: Requires 12VDC input source capable of delivering 120A for the required duration (when used at full continuous capacity). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. A
Maximum input amps / watts:
DC INPUT: Full continuous load - 120A at 12VDC. AC INPUT: 15 amps at 120VAC with full inverter and charger load. Input connection type:DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire
Voltage compatibility (VAC) :120
Voltage compatibility (VDC) :12 BATTERY
Expandable battery runtime:
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) :12
Battery recharge rate:
Includes 4/40 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries. LEDS ALARMS and SWITCHES
Alarms:Audible status indicators
Switches:The inverter provides a RJ-45 port for optional APSRMSW remote control. RJ45 port operates with standard RJ485 interface (APSRMSW sold separately) Front panel LEDs:Set of front panel LEDs display inverter status, charger status, as well as battery voltage status
Cooling method:
Fan
Material of construction:
Powder coated Steel
Form factors supported:
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Appearance:
gray color Item Dimension (L"xW"xH"):
21.47 x 13 x 12.6
Weight:
36.37 lb
Warranty Information:
NA
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- Tripp Lite
- APS1012SW
- New
- 0.00lbs
- 0 X 0 X 0
- Jun 28, 2024
- Sep 09, 2020
Request For Quote.
Tripp APS1012SW , Powerverter, Aps, 120v, 1000w, Invertercharger, Pure Sine Wave Output
