Supermicro SYS-F628R3-RTB+ System Sys-f628r3-rtb+ 4u Xeon E5-2600 V3 Lga2011 Socket-r3 2x3.5inch Hotswap Sata 1280w Redundant Power Supply Brown Box

Processor/Cache
CPU:
- Intel Xeon processor E5-2600 v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
Cores/Cache:
- Up to 18 Cores / Up to 45MB Cache
System Bus:
- QPI Up to 9.6 GT/s System Memory
Memory Capacity:
- 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type:
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
Memory Voltage:
- 1.2V
Error Detection:
- Corrects Single Bit Errors On-Board Devices
Chipset:
- Intel C612 Chipset
SATA:
- SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers:
- Intel i350-AM2 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics:
- ASPEED AST2400 BMC Input / Output (Per Node)
Serial ATA:
- 8x SATA3 (6Gbps) ports
- 2x SATA3 powered ports that support SATA DOM
LAN:
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB:
- 2 x USB 3.0 Ports
VGA:
- 1 x VGA Port
Serial Port / Header:
- 1 x Fast UART 165550 Port Management
Software:
- SuperDoctor 5
- Watch Dog
- NMI
- IPMI 2.0
- SMCBU and SMM
Power Configuration:
- ACPI / APM Power Management
Power-on mode for AC power recovery Front Panel
Buttons:
- Power On/Off button
- System Reset button
LEDs:
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED Expansion Slots (Per Node)
PCI-Express:
- 1 PCI-E 3.0 x16 (LP) + 1 Micro LP
- MicroLP Adapter Matrix (Networking options) Drive Bays (Per Node)
Hot-Swap:
(6+2) 3.5" Hot-swap SATA3 HDD trays Backplane
1x SAS/SATA backplane System Cooling (Per Node)
Fans:
- 2x 8cm 11k RPM middle fans Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input:
- 1000W Output at 100-140V, 8-12A, 50-60Hz
- 1280W Output at 180-240V, 6-8A, 50-60Hz
DC Output:
- 1000W: +12V/83A +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
Certification:
- 80 PLUS PLATINUM Certified System BIOs
BIOs Type:
- 128MB SPI Flash EEPROM with AMI BIOs
BIOs Features:
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI Operating Environment / Compliance
RoHS:
- RoHS Compliant
Environmental Specifications:
- Operating Temperature: 5 C to 40 C (41 F to 104 F)
- Non-Operating Temperature: -40 C to 70 C (-40 F to 158 F)
- Operating Relative Humidity: 8% to 90% (Non-Condensing)
- Non-Operating Relative Humidity: 5% to 95% (Non-Condensing) Item Dimension (L"xW"xH")
42.4 x 28.3 x 15

Weight
150.00 lb

Warranty Information
1 Year