Cart Empty
Zyxel NWA1123-ACPRO Access Point Nwa1123-acpro 802.11ac Dual-radio Dual Mount Poe Access Point Retail
Out of Stock
Special Price $108.53 Regular Price $146.52
Condition: New
Special Price $108.53 Regular Price $146.52
Condition: New
The NWA1123-AC HD supports NebulaFlex, giving you the ability to easily switch between standalone and our license free Nebula cloud management, anytime, with a few simple clicks.
RF Specifications
Support data rate:
- 802.11n: up to 450 Mbps in MCS15 (40 MHz)
- 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
802.11n/ac premium features:
- 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
- Maximal Ratio Combining (MRC)
- 20-, 40- and 80-MHz channels
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- Cyclic Delay diversity (CSD) support
- Maximum Likelihood Demodulation (MLD) support
- Low Density Parity Check (LDPC) support
Antenna gain:
3T3R MIMO:
- Ceiling: 3 dBi
- Wall: 4 dBi
3T3R MIMO:
- Ceiling: 4 dBi
- Wall: 5 dBi
Receive sensitivity: Min. Rx sensitivity to -102 dBm LAN
Number of 10/100/1000M LAN: 2
PoE power draw: 12.48 W (802.3at PoE) WLAN Features
Security and privacy:
- WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise
- EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
- WMM
- 802.1X
- MAC filtering
- L2 Isolation
- RADIUS authentication
Number of multiple SSID: 16
Network:
- IPv6 support
- VLANs
- DHCP client Zyxel One Network
ZON Utility:
Discovery of Zyxel switches, APs and gateways
Centralized and batch configurations:
- IP configuration
- IP renew
- Device reboot
- Device locating
- Web GUI access
- Firmware upgrade
- Password configuration
- One-click quick association with Zyxel AP Configurator (ZAC)
ZAC:
- Batch AP configuration
- Batch AP firmware upgrade
- Batch AP profile backup
Standalone AP mode: Yes
CLI: Yes, SSH
SNMP: Yes Others
Plenum rating: Yes
Power supply: 802.3at PoE only (No DC jack)
MTBF (hr): 1,005,235 Standard Compliance
Ethernet:
- IEEE 802.3,
- IEEE 802.3u,
- IEEE 802.11ab,
- IEEE 802.3au,
- IEEE 802.3az,
- IEEE 802.3at
WLAN:
- Input: AC 100-240 V - 50
- 802.11b: DBPSK, DQPSK, CCK
- 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM Certification
Radio:
- FCC part 15C,
- FCC part 15E,
- ETSI EN 300 328,
- EN 301 893,
- LP0002
EMC:
- FCC part 15B,
- EN 301 489-1,
- EN 301 489-17,
- EN55022,
- EN55024,
- EN61000-3-2/-3,
- BSMI CNS13438
Safety:
- EN 60950-1
- IEC 60950-1
- BSMI CNS14336-1 Included accessories
PoE Injector (Eco pack excluded)
Ethernet 45 cable (Eco pack excluded)
Wall/ceiling mount plate Environmental Specifications
Operating:
- Temperature: 0oC to 50oC (32oF to 122oF)
- Humidity: 10% to 90% (Non-condensing)
Storage:
- Temperature : -40oC to 70oC/-40oF to 158oF
- Humidity : 10% to 90% (Non-condensing) Item Dimension (L inchxW inchxH inch)
10 x 10 x 4 Weight
3.00 lb Warranty Information
Limited Lifetime
Support data rate:
- 802.11n: up to 450 Mbps in MCS15 (40 MHz)
- 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
802.11n/ac premium features:
- 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
- Maximal Ratio Combining (MRC)
- 20-, 40- and 80-MHz channels
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- Cyclic Delay diversity (CSD) support
- Maximum Likelihood Demodulation (MLD) support
- Low Density Parity Check (LDPC) support
Antenna gain:
3T3R MIMO:
- Ceiling: 3 dBi
- Wall: 4 dBi
3T3R MIMO:
- Ceiling: 4 dBi
- Wall: 5 dBi
Receive sensitivity: Min. Rx sensitivity to -102 dBm LAN
Number of 10/100/1000M LAN: 2
PoE power draw: 12.48 W (802.3at PoE) WLAN Features
Security and privacy:
- WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise
- EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
- WMM
- 802.1X
- MAC filtering
- L2 Isolation
- RADIUS authentication
Number of multiple SSID: 16
Network:
- IPv6 support
- VLANs
- DHCP client Zyxel One Network
ZON Utility:
Discovery of Zyxel switches, APs and gateways
Centralized and batch configurations:
- IP configuration
- IP renew
- Device reboot
- Device locating
- Web GUI access
- Firmware upgrade
- Password configuration
- One-click quick association with Zyxel AP Configurator (ZAC)
ZAC:
- Batch AP configuration
- Batch AP firmware upgrade
- Batch AP profile backup
Standalone AP mode: Yes
CLI: Yes, SSH
SNMP: Yes Others
Plenum rating: Yes
Power supply: 802.3at PoE only (No DC jack)
MTBF (hr): 1,005,235 Standard Compliance
Ethernet:
- IEEE 802.3,
- IEEE 802.3u,
- IEEE 802.11ab,
- IEEE 802.3au,
- IEEE 802.3az,
- IEEE 802.3at
WLAN:
- Input: AC 100-240 V - 50
- 802.11b: DBPSK, DQPSK, CCK
- 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM Certification
Radio:
- FCC part 15C,
- FCC part 15E,
- ETSI EN 300 328,
- EN 301 893,
- LP0002
EMC:
- FCC part 15B,
- EN 301 489-1,
- EN 301 489-17,
- EN55022,
- EN55024,
- EN61000-3-2/-3,
- BSMI CNS13438
Safety:
- EN 60950-1
- IEC 60950-1
- BSMI CNS14336-1 Included accessories
PoE Injector (Eco pack excluded)
Ethernet 45 cable (Eco pack excluded)
Wall/ceiling mount plate Environmental Specifications
Operating:
- Temperature: 0oC to 50oC (32oF to 122oF)
- Humidity: 10% to 90% (Non-condensing)
Storage:
- Temperature : -40oC to 70oC/-40oF to 158oF
- Humidity : 10% to 90% (Non-condensing) Item Dimension (L inchxW inchxH inch)
10 x 10 x 4 Weight
3.00 lb Warranty Information
Limited Lifetime
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- ZYXEL
- NWA1123-ACPRO
- New
- 1.00lbs
- 8 X 8 X 8
- Oct 12, 2024
- Feb 29, 2020
Request For Quote.
Zyxel NWA1123-ACPRO Access Point Nwa1123-acpro 802.11ac Dual-radio Dual Mount Poe Access Point Retail
