Supermicro MBD-X10DRFR-P Motherboard Mbd-x10drfr-p E5-2600 V4v3 Lga2011 2xr3 C612 Ddr4 Pci Express 3 Brown Box

Form Factor
Proprietary Processor/Cache
CPU:
- Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
Cores / Cache: Up to 22 Cores / Up to 55MB Cache
System Bus: QPI up to 9.6 GT/s System Memory
Memory Capacity:
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type : 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors On-Board Devices
Chipset: Intel C612 chipset
AHCI SATA: SATA3 (6Gbps), RAID 0, 1, 5, 10
SCU SATA: SATA3 (6Gbps), RAID 0, 1, 5, 10
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers:
- Intel i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics: ASPEED AST2400 BMC Input / Output
SATA: 10x SATA3 (6Gbps) ports
LAN:
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB: 3x USB 3.0 ports (2 rear + 1 Type A)
Video: 1x VGA port
Serial Port / Header: 1x Fast UART 16550 port / 1 Header
DOM: DOM (Disk on Module) power connector
TPM: 1x TPM 1.2 20-pin Header Chassis (Optimized for X10DRFR )
Tower / 4U Rackmount :
- CSE-F418BC-R1K62BP
- CSE-F424AS-R1K28BP
PCI-Express:
- 1 PCI-E 3.0 x16 Low-profile slot
- 1 PCI-E 3.0 x8 Micro Low Profile slot System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
- Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1 Management
Software:
- SuperDoctor 5
- Watch Dog
- NMI
- IPMI 2.0
Power Configurations:
- ACPI Power Management
- Power-on mode for AC power recovery PC Health Monitoring
Voltage:
- Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 6 Phase-switching voltage regulator
FAN:
- 4x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
LED:
- Suspend Static indicator LED
- UID/Remote UID
Other Features: RoHS Operating Environment
Operating Temperature Range: 10^oC - 35^oC (50^oF - 95^oF)
Non-Operating Temperature Range: -40^oC - 70^oC (-40^oF - 158^oF)
Operating Relative Humidity Range: 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range: 5% - 95% (non-condensing) Item Dimension (L inchxW inchxH inch)
NA

Weight
3.00 lb

Warranty Information
NA