Gigabyte H27N-H70 Server H27n-h70 2u 4nodes High Density Rack Sever E5-2600v3v4 16x2.5 Inch Hotswap Retail

Dimensions
2U CPU
Intel Xeon E5-2600 V3 processors
Intel Xeon E5-2600 V4 processors
(NOTE: If only 1 CPU is installed, some PCIe, memory, network or I/O functions might be unavailable.) Socket
Per node: 2 x LGA 2011-3
Total: 8 x LGA 2011-3
Mounting pitch: narrow ILM (56x94mm)
(Max. length of M4 screw threads: 3.7mm)
(Screws longer than 3.7mm might damage the motherboard)
Chipset Intel C612 Memory
Per node: 16 x DIMM slots
Total: 64 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 64GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 1600/1866/2133/2400 MHz LAN
Per node: 2 x GbE LAN ports (Intel I350-AM2), 1 x 10/100/1000 management LAN
Total: 8 x GbE LAN ports (Intel I350-AM2), 4 x 10/100/1000 management LAN Video
Integrated in Aspeed AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp Audio
- Storage
Per node: 2 x 2.5 inch hot-swappable NVMe bays, 2 x 2.5 inch hot-swappable SATA bays
Total: 8 x 2.5 inch hot-swappable NVMe bays, 8 x 2.5 inch hot-swappable SATA bays SATA
Per node: 6 x SATA III 6Gb/s ports
Total: 24 x SATA III 6Gb/s ports SAS
- RAID
Intel SATA RAID 0/1/5/10 Peripheral Drives
- Expansion Slots
Per node:
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus) connector
1 x Mezzanine PCIe x8 (Gen3 x8 bus) connector
Total:
4 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus) connectors
4 x Mezzanine PCIe x8 (Gen3 x8 bus) connectors Internal I/O
Per node:
2 x 18-pin power connectors
1 x Mini-SAS connector
6 x SATA III 6Gb/s ports
1 x USB 3.0 header
1 x Serial header
1 x VGA header
1 x TPM header
1 x Front panel header
1 x SATA power header
1 x SATA SGPIO header
1 x BMC SGPIO header
1 x JTAG BMC header
1 x PLD header
1 x PMBUS header
1 x PMBUS selection jumper
1 x BMC FRB jumper
1 x Software RAID jumper
1 x Clear CMOS jumper
1 x Power on selection jumper
1 x ACK selection jumper
1 x IPMB connector Front I/O
Per node:
2 x USB 3.0
1 x VGA
1 x Power button with LED
1 x ID button with LED
Total:
8 x USB 3.0
4 x VGA
4 x Power buttons with LED
4 x ID buttons with LED x IPMB connector Rear I/O
Per node:
2 x USB 3.0
1 x VGA
1 x Serial
3 x RJ45
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
1 x System status LED
2 x LAN activity LEDs
Total:
8 x USB 3.0
4 x VGA
4 x Serial
12 x RJ45
4 x Power buttons with LED
4 x ID buttons with LED
4 x NMI buttons
4 x Reset buttons
4 x System status LEDs
8 x LAN activity LEDs Backplane I/O
Per node: 2 x SAS/SATA ports, 2 x NVMe ports TPM
1 x TPM header Power Supply
2 x 1600W redundant PSU
80 PLUS Platinum
AC input: 100-127V/ 12A, 47-63Hz, 200-240V/ 9.48A, 47-63Hz
DC output: 1000W at 100-127V, 1000W at 200-240V System Management
Aspeed AST2400 management controller
Avocent MergePoint IPMI 2.0 web interface:
- Network settings
- Network security settings
- Users control
- Services settings
- IPMI settings
- Sessions control
- LDAP settings
- Power control
- Voltages, fans and temperatures monitoring
- System event log
- Events management (platform events, trap settings, email settings)
- Serial Over LAN
- vKVM and vMedia (launch, configuration)