Tripp APSX750 , Powerverter, Aps X 750w, Inverter Charger, Auto-transfer Switching, 2 C13 Outlets

OVERVIEW
Intended Application
Emergency Home Power

SYSTEM OVERVIEW
Voltage compatibility (VAC)
230
Voltage compatibility (VDC)
12
OUTPUT
Frequency compatibility
50 Hz
Output watts
750
Continuous output capacity (watts)
750
Peak output capacity (watts)
1500
Output nominal voltage
230V
Output voltage regulation
LINE POWER (AC): Maintains 230V nominal sine wave outputfrom line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC(+/5%).
Output frequency regulation
50 Hz (+/- 0.3 Hz)
Overload protection
Includes 3A input breaker dedicated to the chargingsystemand4Aoutput breaker for AC output loads
Outlet quantity / type
2 AC outlets INPUT
Recommended Electrical Service
DC INPUT:Requires12VDCinputsourcecapableofdelivering 72A for the required duration (when used at full continuous capacity -DCrequirementsincrease during OverPower and DoubleBoost operation). Forautomotiveapplications,professionalhardwire installation with 100A minimumbatterysystemfusingisrecommended.ACINPUT:230VAC
Maximum input amps / watts
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT:6.2A at 230VAC with full inverter and charger load (2.2A max charger-only/combinedinputloadtosupport charger and AC output is automatically controllable to 66%-33%-0%basedonACoutputloadingusing the charger limiting set points - see manual for setting instructions)
Input connection type
DC INPUT: Set of 2 DC bolt-down terminals. ACINPUT:IEC320C14 inlet connection
BATTERY
Expandable battery runtime
Runtime is expandable with any number of user supplied wetor gel type batteries
DC system voltage (VDC)
12
Battery Pack Accessory (optional)
98-121 sealed lead acid battery (optional)
Battery recharge rate
Selectable 5 / 20 amp with 1/2 cycle (10 ms) transfer time LEDS ALARMS SWITCHES
Switches
3positionon/off/remoteswitchenablessimpleon/offpowercontrolplus"auto/remote" setting that enables distant on/off control of the invertersystemwhenusedinconjunction with optional APSRM4 accessory when used in inverter mode. InACuninterruptiblepowermode, auto/remote setting enables automatic transfer from line power to battery power -tomaintaincontinuous AC power to connected loads.
Front panel LEDs
Set of 6 LEDs offer continuous status information on loadpercentage(6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
SURGE / NOISE SUPPRESSION
AC suppression joule rating
840

PHYSICAL
Shipping weight (lbs)
20
Cooling method
Multi-speed fan
Unit Dimensions (HWD/in)
7 x 8.75 x 9
Unit Dimensions (HWD/cm)
17.78 x 22.23 x 22.86
Shipping Dimensions (HWD/in)
12.5 x 11 x 10.75
Shipping Dimensions (HWD/cm)
31.75 x 27.94 x 27.31
Material of construction
Polycarbonate
Style
Heavy-duty with built-in battery charger
Form factors supported
MountingslotsenablepermanentplacementofAPSX750onanyhorizontal surface (see manual for additional mounting information) ENVIRONMENTAL
Relative Humidity
0-95% non-condensing

LINE / BATTERY TRANSFER
Transfer time from line power to battery mode
Transfer time fromlinepowertobattery mode: 10 milliseconds (typical - compatible with manycomputers,serversandnetworkingequipment - verify transfer time compatibility of loads for UPS applications)
Low voltage transfer to battery power
Low voltagetransfertobatterypower:InAC"auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (useradjustable to 163, 182, 201V - see manual)
High voltage transfer to battery power
In AC "auto" mode,inverter/chargerswitchesto battery mode as line voltage increases to 272 SPECIAL FEATURES
Appearance
Black color
Remote control capability
Yes

CERTIFICATIONS
Certifications
RoHS Compliant Weight
20.00 Warranty
1-year within continental North America and 120 days everywhere else