Gigabyte R150-T63 Sever R150-t63 1u Cavium Arm 32core Ddr4 Mt60-sc6 4x3.5 Hot Swap Hdd Retail

Dimensions
1U Motherboard
MT60-SC6 CPU
Cavium ThunderX family
2 x ThunderX_CP processors
64bit ARMv8 architecture
32 cores per processor, 1.8GHz
BGA 2601, 28nm technology Chipset
- Memory
16 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
Up to total 512GB memory capacity
1866 MHz with 2DPC for Single Rank or Dual Rank RDIMMs / ECC UDIMMs
2133 MHz with 1DPC for Single Rank or Dual Rank RDIMMs / ECC UDIMMs
NOTE: Due to processor specification, at least 4 x DIMM modules must be installed for this model LAN
3 x 40GbE QSFP+ LAN ports
4 x 10Gb/s SFP+ LAN ports
1 x 10/100/1000 management LAN port Video
Integrated in Aspeed AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp Audio
- Storage
4 x 3.5" hot-swappable HDD bays
2.5" HDD/SSD supported
- NOTE: GIGABYTE recommends that you follow the QVL when selecting hard drives, to avoid any system compatibility issues SAS
- RAID
Depends on OS RAID Peripheral Drives
- Expansion Slots
1 x Full-height half-length slot with PCIe x16 (Gen3 x8 bus) slot Internal I/O
1 x 24-pin main power connector
2 x 8-pin power connectors
2 x CPU fan header
5 x System fan headers
1 x USB 3.0 header
1 x COM2 header
1 x SATA SGPIO header
1 x Front panel headers
1 x back plane board header
1 x PMBUS header
1 x BMC JTAG header
1 x JTAG PLD header
1 x BMC reset header
1 x Clear CMOS jumper
1 x BIOS recovery jumper
1 x IPMB connector Front I/O
2 x USB 3.0
1 x Power button
1 x Power LED
1 x ID button
1 x Reset button
1 x HDD activity LED
2 x LAN activity LEDs(Dedicated for 10Gb/s SFP+ LAN ports) Rear I/O
1 x ID button with LED
2 x USB 3.0
1 x VGA
1 x COM1
3 x QSFP+
4 x SFP+
1 x RJ45 Backplane I/O
Speed and bandwidth:
SATA 6Gb/s TPM
- Power Supply
2 x 650W redundant PSUs
80 PLUS Platinum
AC input: 100-240V, 50-60Hz, 10/5A
DC output: 650W System Management
Aspeed AST2400 management controller
Avocent MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM and Media (launch, configuration)