Supermicro SYS-1029TP-DC0R Super Micro Computer

Motherboard (Two per System)
Super X11DPT-PS
Processor/Cache (per Node)
CPU
Dual Socket P (LGA 3647)
2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, Dual UPI up to 10.4GT/s
Support CPU TDP 70-145W
Cores
Up to 28 Cores
Note
BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R)
System Memory (per Node)
Memory Capacity
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Memory Type
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
On-Board Devices (per Node)
Chipset
Intel C621 chipset
SAS
Broadcom 3008 SAS3 (12Gbps) controller, SW RAID 0, 1, 10 support
Network Controllers
Barebones and Complete System must have at least one SIOM card installed per node
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
ASPEED AST2500 BMC
Input / Output (per Node)
SAS
4 SAS3 (12Gbps) ports
LAN
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 3.0 ports (rear)
VGA
1 VGA port
Serial Port / Header
1 Fast UART 16550 port / 1 Header (internal)
Others
2 SuperDOM support on the motherboard
1 NVMe or 2 SATA M.2 (22x80/60/42 mm) support with option part: AOC-SMG3-2H8M2
M.2 and SuperDOM are for OS boot and they cannot coexist
System BIOS
BIOS Type
AMI 32MB SPI Flash ROM
Management
Software
Intel Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor 5
Watchdog
Power Configurations
ACPI Power Management
PC Health Monitoring
CPU
Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
FAN
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
Thermal Control for fan connectors
Chassis
Form Factor
1U Rackmount
Model
CSE-809H-R1K05P3
Front Panel
Buttons
Power On/Off button
UID button
LEDs
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
2 PCI-E 3.0 x16 Low-profile slots
1 SIOM card support
Note: Barebones and Complete System must bundle with SIOM
(With only one CPU installed, SXB2 M.2 and SXB4 riser card slots not function)
Drive Bays (per Node)
Hot-swap
4 Hot-swap 2.5" SAS3/SATA3 drive bays
Backplane
SAS3 backplane
System Cooling
Fans
3 Heavy duty counter rotating fans with air shroud and optimal fan speed control
PowerStick Power Supply
1000W 1U Redundant Power Supplies with PMBus
Total Output Power
800W: 100 - 127Vac
1000W: 200 - 240Vac
Dimension (W x H x L)
38 x 40 x 360 mm
Input
100 - 127Vac / 9 - 7.5A / 50 - 60Hz
200 - 240Vac / 6 - 5A / 50 - 60Hz
+12V
Max: 66.7A / Min: 0A (100 - 127Vac)
Max: 83A / Min: 0A (200 - 240Vac)
+5Vsb
Max: 4A / Min: 0A
Output Type
Gold Finger Connector (16 Power Pin, 14 Signal Pin)
Certification
Titanium Level
Operating Environment
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10^oC - 35^oC (50^oF - 95^oF)
Non - operating Temperature:
- 40^oC to 60^oC ( - 40^oF to 140^oF)
Operating Relative Humidity:
8% to 90% (non - condensing)
Non - operating Relative Humidity:
5% to 95% (non - condensing)
Item Dimension (L"xW"xH")
39 x 30 x 8
Weight
68.00 LB
Warranty Information
1 year