Supermicro MBD-X10SDV-2C-7TP4F-B Moherboard Mbd-x10sdv-2c-7tp4f-b D-1508 Fcbga 1667 Pcie Sata Flex Atx Retail

Form Factor
Flex ATX Processor/Cache
CPU : Intel Pentium processor D1508,2.2GHz-2.6GHz CPU TDP support 25W
FCBGA 1667
Cores / Cache : 2 Cores, 4 Threads / 3MB System Memory
Memory Capacity : 4x DDR4 DIMM sockets
Supports up to 128GB DDR4 ECC RDIMM
Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type : 1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes : 32GB, 16GB, 8GB, 4GB
Memory Voltage : 1.2 V
Error Detection : Corrects single-bit errors
Detects double-bit errors
(using ECC memory) On-Board Devices
Chipset : System on Chip
SATA/SAS : SoC controller for 4 SATA3 (6Gbps) ports RAID 0,1,5,10 RSTe
LSI 2116 SW controller for 16 SATA3 (6Gbps) ports SAS2 and SATA3
Network Controllers : Dual 10G SFP+ from D-1500 SoC
Dual 1GbE with Intel I210
IPMI : Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video : Aspeed AST2400
TPM : TPM 2.0 header Input / Output
SATA/SAS : 4 SATA3 (6Gbps) ports
16 SAS2/SATA3 ports
LAN : 2 10G SFP+ LAN ports
2 1GbE LAN ports
1 Dedicated IPMI LAN port
USB : 2 USB 3.0 ports (rear)
5 USB 2.0 ports
(4 via headers, 1 Type A)
Video : 1 VGA port
Serial Port / Header : 1 COM port (header)
DOM : 2 SuperDOM (Disk on Module) power connectors Chassis (Optimized for X10SDV-2C-7TP4F )
1U Chassis :
SC504-203B
SC505-203B
SC514-505
SC515-R407
SC813MTQ-350CB SuperServer(s) with X10SDV-2C-7TP4F
Model(s) : SSG-5018D2-AR12L Expansion Slots
PCI-Express : 2 PCI-E 3.0 x8 slots
M.2 : Interface: PCI-E 3.0 x4
Form Factor: M Key 2242/2280/22110
Support SATA devices
Mini PCI-E : Interface: PCI-E 2.0 x1
Support mSATA System BIOS
BIOS Type : 128Mb SPI Flash with AMI BIOS
BIOS Features : PCI 3.0
ACPI 5.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.8
UEFI 2.4
RTC (Real Time Clock) Wakeup Management
Software : Intel Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SUM
SuperDoctor 5
Watch Dog
Power Configurations : ACPI Power Management
ATX Power connector
+12V DC Power Input
Control of power-on for recovery from AC power loss
CPU thermal trip support for processor protection
M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL PC Health Monitoring
Voltage : Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control, VBAT
FAN : Total of six 4-pin fan headers supporting tachometer status monitoring
Dual Cooling Zone
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature : Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
LED : CPU / System Overheat LED
Other Features : Chassis intrusion detection
Chassis intrusion header
12V DC or ATX Power Source
RoHS Operating Environment
Operating Temperature Range : 0^oC - 60^oC (32^oF - 140^oF) Item Dimension (L inchxW inchxH inch)
NA

Weight
5.00 lb

Warranty Information
1 year