Gigabyte GA-J1900N-D3V Motherboard Ga-j1900n-d3v Celeron J1900 8gb Ddr3 Pci Sata Usb Mini-itx Retail

CPU
1.Built in with an Intel Celeron Quad-Core J1900 SoC (2.0 GHz)
( Do not disassemble the onboard SoC and the heatsink by yourself to avoid damage to these components.)
2.2 MB Cache Memory
1.2 x DDR3/-L SO-DIMM sockets supporting up to 8 GB of system memory
( If only one DDR3/-L memory module is to be installed, be sure to install it in the SODIMM_1 socket.)
2.Dual channel memory architecture
3.Support for DDR3/-L 1333 MHz memory modules
4.Support for non-ECC memory modules Onboard Graphics
Integrated in the SoC:
1.1 x D-Sub port, supporting a maximum resolution of 2560x1600
2.1 x DVI-D port, supporting a maximum resolution of 1920x1080
( The DVI-D port does not support D-Sub connection by adapter.) Audio
1.Realtek ALC887 codec
2.High Definition Audio
3.2/4/5.1/7.1-channel To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
4.Support for S/PDIF Out LAN
1.2 x Realtek GbE LAN chips (10/100/1000 Mbit)

Expansion Slots
1.1 x PCI slot
2.1 x Mini PCI Express x1 slot
(The Mini PCI Express slot conforms to PCI Express 2.0 standard.) Storage Interface
Integrated in the SoC:
1.2 x SATA 3Gb/s connectors

USB
Integrated in the SoC:
1.2 x USB 2.0/1.1 ports (available through the internal USB header)
SoC + Renesas uPD720210 USB 3.0 Hub:
1.4 x USB 3.0/2.0 ports on the back panel Internal I/O Connectors
1.1 x 24-pin ATX main power connector
2.1 x 4-pin ATX 12V power connector
3.2 x SATA 3Gb/s connectors
4.1 x CPU fan header
5.1 x system fan header
6.1 x front panel header
7.1 x front panel audio header
8.1 x S/PDIF Out header
9.1 x USB 2.0/1.1 header
10.1 x parallel port header
11.1 x Clear CMOS jumper
12.1 x chassis intrusion header
13.1 x debug card header Back Panel Connectors
1.1 x PS/2 keyboard port
2.1 x PS/2 mouse port
3.1 x D-Sub port
4.1 x DVI-D port
5.2 x serial ports
6.4 x USB 3.0/2.0 ports
7.2 x RJ-45 ports
8.3 x audio jacks (Line In, Line Out, Mic In) I/O Controller
1.iTE I/O Controller Chip

H/W Monitoring
1.System voltage detection
2.CPU/System temperature detection
3.CPU/System fan speed detection
4.CPU/System fan speed control
( Whether the fan speed control function is supported will depend on the cooler you install.) BIOS
1.2 x 64 Mbit flash
2.Use of licensed AMI UEFI BIOS
3.Support for DualBIOS
4.PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Bundle Software
1.Norton Internet Security (OEM version)
2.Intel Smart Connect Technology Operating System
1.Support for Windows 8.1/8 32-bit/64-bit
2.Support for Windows 7 64-bit
( To support Windows 7 64-bit, please update the latest BIOS and drivers.)

Form Factor
1.Mini-ITX Form Factor 17.0cm x 17.0cm Item Dimension (L"xW"xH"):
9 x 8 x 3

Weight:
1.6 lb

Warranty Information:
3 years