Asrock IMB-150D Motherboard Imb-150d Celeron J1900n2930n2920 Max.8gb Ddr3l Hdmid-sub Pci Express Mini-itx Retail

Form Factor
- Mini-ITX (6.7-in x 6.7-in) Processor System
CPU: Intel Celeron Processor J1900 / N2930 / N2920
Core Number: 4
Max Speed: (By CPU)
L3 Cache: 2MB
Chipset: N/A
BIOS: UEFI Expansion Slot
PCIe: 1
PCI: 0
Mini-PCIe: 1 (Half Size)
mSATA: 1
CFast Card Socket: 0 Memory
Technology: Supports Dual Channel DDR3L 1333MHz SDRAM
Max. : 8GB
Socket: 2 x SO-DIMM Graphics
Controller: Intel Gen7 Intel Graphics DX 11, OGL3.2
VRAM: Shared Memory
VGA: Supports max resolution up to 1920x1200
DVI: No
LVDS: Dual Channel 24-bit, max resolution up to 1920x120060Hz
HDMI: Supports HDMI, max resolution up to 1920x1200
DisplayPort: No
MultiDisplay: Yes (Dual Display) Ethernet
Ethernet: 10/100/1000 Mbps
Controller: GbE LAN: 2 x Realtek RTL8111G-CG
Connector: 2 x RJ45 Storage
Max Data Transfer Rate: SATA2 (3.0Gb/s) Rear I/O
VGA: 1
DVI: 0
HDMI: 1
DisplayPort: 0
Ethernet: 2
USB: 4 (2 x USB 3.0, 2 x USB 2.0)
Audio: 2 (Mic-in, Line-out)
Serial: 3 (RS-232/422/485)
eSATA: 0
PS2: 2 (1 x keyboard, 1 x mouse) Internal Connector
USB: 6 (2 x USB 3.0, 4 x USB 2.0)
LVDS / inverter: 1/1
VGA: 0
Serial: 2 (RS-232)
SATA: 2 x SATA2 (3.0Gb/s)
mPCIe: 1
Parallel: 1
mSATA: 1 (shared)
IrDA: 0
GPIO: 4 x GPI + 4 x GPO
SATA PWR Output: 1
Speaker Header: 1 Watchdog Timer
Output: From Super I/O to drag RESETCON
Interval: 256 Segments, 0, 1, 2, ...255sec/min Power Requirements
Input PWR: 9-19V DC-In (4-pin ATX PWR Con)
Power On:
AT/ATX Supported
- AT : Directly PWR on as Power input ready
- ATX: Press Button to PWR on after Power input ready Environment
Temperature: 0^oC to 60^oC Packing List
- 1 x Jumper setting guide
- 1 x Driver DVD
- 1 x IO shield
- 2 x SATA cable
- 1 x SATA power cable
- 2 x Screw for mini card Item Dimension ( L inch x W inch x H inch)
11 x 9 x 3 Weight
2.00 lb Warranty Information
3 years