Engenius ENS202 Wireless Long Range Outdoor N300 2.4ghz 802.11n Bridge Ap Retail

Hardware:
RF
- 2.4 GHz Frequency Band Memory
- 64MB Flash
- 16MB Antenna
- Internal 8 dBi Directional Antenna with Dual Polarization Physical Interface
- 2 x RJ-45 Fast Ethernet (10/100 Mbps)
- 1 x Reset Button Power Requirements
- Active Ethernet (Power-Over-Ethernet)
- Proprietary PoE Design
- Power Adapter (United States) 24V / 0.6A RF Specifications
Frequency Band:
- 2.4 GHz
- IEEE 802.11 b/g/n Data Rate
- Up to 300 Mbps Software:
Operation Modes
- Access Point / Client Bridge / Client Router / WDS Wireless/Network
- Auto Channel Selection
- Distance Control (802.1x Ack timeout)
- CLI (Command Line Interface) Supported
- 802.1x RADIUS Supplicant (CB Mode)
- Multiple SSID (4 SSID), BSSID
- WDS AP / WDS Bridge / WDS Station
- Multicast Supported
- VLAN Tagging / VLAN Pass-through
- Auto Reboot
- Wi-Fi Scheduling Security
- WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
- WPA/WPA2 Enterprise (WPA-EAP using TKIP)
- Hide SSID in beacons
- MAC address filtering, up to 50 field
- Wireless STA (Client) connected list QoS (Quality of Service)
WMM (Wireless Multimedia) Temperature Range
- Operating -20C70C / -4F158F
- Storage -30C to 80C / -22F to 176F
- Humidity (Non-Condensing) 0%90% typical Package Contents
- ENS202 Client Bridge/Access Point
- Power Adapter
- PoE Injector (EPE1212)
- Pole Mount Set
- Screw Set
- Quick Start Guide
- Technical Support Card Item Dimension (L"xW"xH")
12.2 x 9.2 x 2.8

Weight
1.89 lb

Warranty Information
1 Year