Tripp N234-MI-1005 Medical Ethernet Isolator Rj45

Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.Comply with IEC 60601-1 for Use in the Patient Care Vicinity The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic?s network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)Install In-Line on an Ethernet Network This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.Comply with TAA Requirements The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.One-Year Warranty The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.Typical Applications Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities Connect an EMG measuring station with an analysis computer in a doctor?s consulting room Connect the PC of a prolonged EEG system to a clinic?s networkSystem Requirements Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair) Cat6 network cableProduct Type Medical Ethernet IsolatorColor GrayWeight (Approximate) 0.05 kgPackage Contents Medical Ethernet Isolator ? RJ45, For Patient Care Vicinity, IEC 60601-1 Owner?s manualApplication/Usage NetworkEnvironmentally Friendly YesEnvironmental Certification RoHS REACH