Tripp SU20KRTHWTFASSM , Ups, Smartonline 20,000va, 16u Rack Tower, 240120v, 18000w, Hardwire, Snmpwebcard

OUTPUT
Output Volt Amp Capacity (VA)
20000
Output kVA Capacity (kVA)
20
Output Watt Capacity (Watts)
18000
Output kW Capacity (kW)
18
Output Capacity Details
Output de-rates to 18kVA / 16kW with 208V nominal input voltage, Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power Double conversion mode is automatically restored as load levels are reduced to 95% or less
Power Factor
0.9
Crest Factor
3:1
Nominal Output Voltage(s) Supported
120V, 240V
Nominal Voltage Details
Included step-down transformer supports 120V output
Frequency Compatibility
60 Hz
Frequency Compatibility Details
Output frequency regulation +/- 0.05Hz (free running)
Output Voltage Regulation (Line Mode)
+/- 2%
Output Voltage Regulation (Battery Mode)
+/- 2%
Output Receptacles
Hardwire
Output AC Waveform (AC Mode)
Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
Individually Controllable Load Banks
No
INPUT
Rated input current (Maximum Load)
98A
Nominal Input Voltage(s) Supported
208V AC,240V AC
UPS Input Connection Type
Hardwire
UPS Input Connection Description
3 wire single phase input (L1, L2, G)
Recommended Electrical Service
120A at 200V-240V (L, N, PE), or 125A at 200V, 208V, or 240V (L1, L2, G)
Input Phase
Single-Phase
BATTERY
Full Load Runtime (min.)
4.3 minutes (18,000 watts)
Half Load Runtime (min.)
12.5 minutes (9000 watts)
Expandable Battery Runtime
Runtime is expandable with external battery packs
External Battery Pack Compatibility
BP240V10RT3U, BP240V787C-1PH
Expandable Runtime Description
For best results, add external batteries in multiples of two so that both included 10kVA power modules have an equal number and type of connected battery packs
DC System Voltage (VDC)
240
Battery Recharge Rate (Included Batteries)
6 hours from 10% to 90% (typical, full load discharge)
Battery Replacement Description
Hot-swappable, user replaceable external battery packs
Expandable Runtime
Yes
VOLTAGE REGULATION
Voltage Regulation Description
2% output voltage regulation in standard online, double-conversion mode
Overvoltage Correction
Corrects overvoltages up to 300V
Undervoltage Correction
Corrects undervoltages as low as 100V
USER INTERFACE, ALERTS and CONTROLS
Front Panel LCD Display
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options, LED/LCD panel rotates for viewing in rack/tower formats, LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual)
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation, 2 additional switches support set and execute scrolling LCD functions bundled PDU includes bypass switch to enable hot-swap UPS power module replacement
Alarm Cancel Operation
Alarm cancel switch
Audible Alarm
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
LED Indicators
6 LEDs indicate line power, online mode, bypass mode, on-battery, charger and AC output status LCD screen offers additional information and control options
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating
2565
UPS AC Suppression Response Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
PHYSICAL
Primary Form Factor
Rackmount
Rack Height (U Spaces)
14
Maximum Device Depth (cm)
82.55
UPS Dimensions Details
Includes 2 SU10000RT3UPM UPS/Power modules, 2 BP240V10RT3U Battery packs, 1 SU20KXFMRT4U transformer and SUPDMB20KHW parallel bypass PDU, Listed weights and dimensions for UPS/Power module, battery pack and transformer each refer to a single unit MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with parallel bypass PDU installed
Cooling Method
Fans
UPS Housing Material
Steel
Maximum Device Depth (mm)
826
Stepdown Transformer Height (mm)
178
Stepdown Transformer Width (mm)
445
Stepdown Transformer Depth (mm)
744
Primary UPS Height (mm)
131
Primary UPS Width (mm)
445
Primary UPS Depth (mm)
656
ENVIRONMENTAL
Operating Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
6830
Battery Mode BTU / Hr. (Full Load)
9185
AC Mode Efficiency Rating (100% Load)
87%
Operating Elevation (ft.)
0-3000m (0 to 10,000 ft.)
Audible Noise
60 dBA at front side 1 meter
Operating Elevation (m)
0-3000 m
COMMUNICATIONS
Communications Interface
DB9 Serial, EPO (emergency power off), Pre-installed network card USB (HID enabled)
Network Monitoring Port Description
Additional contact closure support with optional RELAYIOMINI interface cards, RELAYIOMINI installation requires removal of panel containing USB ports
PowerAlert Software
For local monitoring via the UPSs built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
Communications Cable
USB, DB9 serial and EPO cables included
WatchDog Compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time
No transfer time (0 ms.) in online, double-conversion mode
Low Voltage Transfer to Battery Power (Setpoint)
100V
High Voltage Transfer to Battery Power (Setpoint)
300V
SPECIAL FEATURES
Cold Start (Startup in Battery Mode During a Power Failure)
Cold-start operation supported
High Availability UPS Features
Automatic inverter bypass, Hot swappable batteries, Hot swappable UPS power module Manual bypass switch
Green Energy-Saving Features
Support for daily startup and shutoff
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA), Tested to CSA (Canada), Meets FCC Part 15 Category A (EMI), ROHS (Restriction of Hazardous Substances)
UPS Certification Details
IEC 61000-4-5 1995 B Surge Immunity
Item Dimension (L"xW"xH")
50 x 27 x 52
Weight
918.00 LB
Warranty Information
2-year limited warranty