Supermicro SYS-1028U-E1CR4+ System Sys-1028u-e1cr4+ 1u E5-2600v4v3 Lga2011 10x2.5 Inch Hot Swap 750w Rps Brown Box

Processor/Cache
CPU:
- Intel Xeon processor E5-2600 v4/ v3 family (up to 160W TDP)
- Dual Socket R3 (LGA 2011)
Cores / Cache: Up to 22 Cores / Up to 55MB Cache
System Bus: QPI up to 9.6 GT/s System Memory
Memory Capacity:
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors On-Board Devices
Chipset: Intel C612 chipset
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Connectivity:
- 4x 10GBase-T ports via AOC-UR-i4G
- Intel i350 Gigabit Ethernet Controller
- 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics: ASPEED AST2400 BMC Input / Output
SAS 10x SAS3 ports support via expander and storage Add-on Cards
One of the following storage Add-on cards required:
- AOC-S3108L-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3 16 HDD)
- AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)
- AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)
- AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
LAN:
- 4x RJ45 GbE LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB: 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video: 1x VGA Connector
Serial Port: 1x Serial header System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1 Management
Software:
- SuperDoctor 5
- Intel Node Manager 3.0
- Watch Dog
- NMI
- SUM and SSM
- Optional IPMI 1.5 / 2.0
Power Configurations:
- ACPI Power Management
- Power-on mode for AC power recovery Chassis
Form Factor: 1U Rackmount
Model: CSE-119UTS-R751P-T Available Color
Black Front Panel
Buttons:
- Power On/Off button
- System Reset button
LEDs:
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED Expansion Slots
PCI-Express:
- 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) Drive Bays
Hot-swap: 10x 2.5" Hot-swap drives supported via expander System Cooling
Fans:
- 5x heavy duty fans with optimal fan speed control
- 3x additional fans optional
Air Shroud: 1x Air Shroud Power Supply
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input:
- 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
+12V:
- Max: 62.5A and Min: 0A (100Vac-127Vac)
- Max: 62.5A and Min: 0A (200Vac-240Vac)
12V SB:
- Max: 2.1A
- Min: 0A
Certification: Platinum Level PC Health Monitoring
Voltage:
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
FAN:
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature-
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
LED:
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
Other Features:
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS Operating Environment / Compliance
RoHS: RoHS Compliant
Environmental Spec.:
- Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
- Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L inchxW inchxH inch)
NA

Weight
41.00 lb

Warranty Information
1 YEAR