Tripp SU20KRT-1TF , Ups, Smartonline 20,000va, 14u Rack Tower, 208120v Or 240120v, 18000w, L6-30r, C19

OUTPUT
- Output Volt Amp Capacity (VA):
20000
- Output kVA Capacity (kVA):
20
- Output Watt Capacity (Watts):
18000
- Output kW Capacity (kW):
18
- Output Capacity Details:
Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds, Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power, Double conversion mode is automatically restored as load levels are reduced to 95% or less
- Power Factor:
0.9
- Crest Factor:
3:1
- Nominal Output Voltage(s) Supported:
120V, 208V, 240V
- Nominal Voltage Details:
This configuration requires the Power Module be set to 208 or 240V output voltage, included step-down transformer supports 120V output (when the voltage-selection switch on the transformer module is set to match the 208 or 240V power module setting)
- Frequency Compatibility:
60 Hz
- Frequency Compatibility Details:
Output frequency regulation +/- 0.05Hz (free running)
- Output Voltage Regulation (Line Mode):
+/- 2%
- Output Voltage Regulation (Battery Mode):
+/- 2%
- Output Receptacles:
(4) 5-15R / (8) 5-15/20R / (2) L6-30R / (8) C19
- Output Receptacle Details:
Total 120V output is limited to 4992 watts for 208V input and 5760 watts for 240V input. Additional 120V capacity is available by adding a second SU6000XFMR2U step-down transformer.
- Output Circuit Breakers:
POWER MODULE: Two built-in 30A breakers protect one L6-30R outlet each, Eight built-in 20A breakers protect one C19 outlet each, TRANSFORMER MODULE: Two 15A breakers protect 2 5-15R outlets each, Two 20A breakers protect 4 5-15/20R outlets each
- Output AC Waveform (AC Mode):
Pure Sine wave
- Output AC Waveform (Battery Mode):
Pure Sine wave
- Individually Controllable Load Banks:
No
INPUT
- Rated input current (Maximum Load):
108A (208V), 93.6A (240V)
- Nominal Input Voltage(s) Supported:
208V AC, 240V AC
- UPS Input Connection Type:
Hardwire
- UPS Input Connection Description:
3 wire single phase input (L1, L2, G)
- Recommended Electrical Service:
125A at 208V, or 240V (L1, L2, G)
- Input Phase:
Single-Phase
BATTERY
- Full Load Runtime (min.):
4.3 minutes (18,000 watts)
- Half Load Runtime (min.):
12.5 minutes (9000 watts)
- Expandable Battery Runtime:
Runtime is expandable with external battery packs
- External Battery Pack Compatibility:
BP240V10RT3U, BP240V557C-1PH, BP240V787C-1PH, BP240V1037C-1PH, BP240V1407C-1PH
- Expandable Runtime Description:
For best results, add external batteries in multiples of two so that both included 10kVA power modules have an equal number and type of connected battery packs
- DC System Voltage (VDC):
240
- Battery Recharge Rate (Included Batteries):
Less than 6 hours from 10% to 90% (typical, full load discharge)
- Battery Replacement Description:
Hot-swappable, user replaceable external battery packs
- Expandable Runtime:
Yes
VOLTAGE REGULATION
- Voltage Regulation Description:
2% output voltage regulation in standard online, double-conversion mode
- Overvoltage Correction:
Corrects overvoltages up to 300V
- Undervoltage Correction:
Corrects undervoltages as low as 100V
USER INTERFACE, ALERTS and CONTROLS
- Front Panel LCD Display:
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options, LED/LCD panel rotates for viewing in rack/tower formats, LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual)
- Switches:
2 Switches control off/on power status and alarm-cancel/self-test operation, 2 additional switches support set and execute scrolling LCD functions, bundled PDU includes bypass switch to enable hot-swap UPS power module replacement
- Alarm Cancel Operation:
Alarm cancel switch
- Audible Alarm:
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
- LED Indicators:
6 LEDs indicate line power, online mode, bypass mode, on-battery, charger and AC output status, LCD screen offers additional information and control options
SURGE / NOISE SUPPRESSION
- UPS AC Suppression Joule Rating:
2565
- UPS AC Suppression Response Time:
Instantaneous
- EMI / RFI AC Noise Suppression:
Yes
PHYSICAL
- Included Mounting Accessory Description:
5 sets of adjustable 4 post rack rails included (one for each included 2U/3U module)
- Installation Form Factors Supported with Optional Accessories:
2 post rackmount (2POSTRMKITHD), Tower (2-9USTAND)
- Optional Mounting Accessory Notes:
Qty 5 2POSTRMKITHD required, Qty 2 2-9USTAND required
- Primary Form Factor:
Rackmount
- Rack Height (U Spaces):
14
- UPS Dimensions Details:
Includes 2 SU10000RT3UPM UPS/Power modules, 2 BP240V10RT3U Battery packs, 1 SU6000XFMR2U transformer and SUPDMB20K parallel bypass PDU, Listed weights and dimensions for UPS/Power module, battery pack and transformer each refer to a single unit, MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with parallel bypass PDU installed
- Stepdown Transformer Dimensions (hwd / cm):
8.89 x 44.45 x 55.37
- Cooling Method:
Fans
- UPS Housing Material:
Steel
ENVIRONMENTAL
- Operating Temperature Range:
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range:
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity:
0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load):
6830
- Battery Mode BTU / Hr. (Full Load):
9185
- AC Mode Efficiency Rating (100% Load):
90%
- Operating Elevation (ft.):
0-3000m (0 to 10,000 ft.)
- Audible Noise:
60 dBA at front side 1 meter
- Operating Elevation (m):
0-3000 m
COMMUNICATIONS
- Communications Interface:
USB (HID enabled), DB9 Serial, EPO (emergency power off), Slot for SNMP/Web interface
- Network Management Cards:
SNMPWEBCARD, TLNETCARD, WEBCARDLX, MODBUSCARD, RELAYIOCARD
- Network Monitoring Port Description:
Applications utilizing any supported network management card option, require the use of two network cards of the same-model (install one card per included UPS power module), RELAYIOMINI installation requires removal of panel containing USB ports on each included UPS power module
- PowerAlert Software:
For local monitoring via the UPSs built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable:
USB, DB9 serial and EPO cables included
- WatchDog Compatibility:
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
- Transfer Time:
No transfer time (0 ms.) in online, double-conversion mode
- Low Voltage Transfer to Battery Power (Setpoint):
100V
- High Voltage Transfer to Battery Power (Setpoint):
300V
SPECIAL FEATURES
- Cold Start (Startup in Battery Mode During a Power Failure):
Cold-start operation supported
- High Availability UPS Features:
Automatic inverter bypass, Hot swappable batteries, Hot swappable UPS power module, Manual bypass switch
- Green Energy-Saving Features:
Support for daily startup and shutoff
CERTIFICATIONS
- UPS Certifications:
Tested to UL1778 (USA), Tested to CSA (Canada), Meets FCC Part 15 Category A (EMI), ROHS (Restriction of Hazardous Substances)
- UPS Certification Details:
IEC 61000-4-5 1995 B Surge Immunity
Package Includes
Two SU10000RT3UPM UPS power modules
Two BP240V10RT3U battery packs
One SU6000XFMR2U 208/240V to 120V transformer
SUPDMB20K parallel PDU with Bypass switch
4-post rackmount installation kit
USB, DB9 and EPO cables
Item Dimension (L inchxW inchxH inch)
51 x 40 x 32
Weight
781.00lb
Warranty Information
2-year limited warranty