Supermicro SSG-6038R-E1CR16L System Ssg-6038r-e1cr16l 3u Rackmount Xeon E5-2600 V3 Lga2011 2xsocket-r3 16x3.5inch Hotswap 920w Redundant Retail

Processor/Cache
CPU:
- Intel Xeon processor E5-2600 v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
Cores/Cache: Up to 18 Cores / Up to 45MB Cache
System Bus: QPI Up to 9.6 GT/s System Memory
Memory Capacity:
- 16x 288-Pin DDR4 DIMM Slots
- Up to TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type: 2133/1866/1600MHz ECC DDR4 SDRAM 72-Bit
DIMM Sizes:
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects Single-Bit Errors On-Board Devices
Chipset: Intel C612 Chipset
SAS: SAS3 (12Gbps) via LSI 3008, IT Mode
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers:
- Dual 10GBase-T LAN with Intel X540 Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics: ASPEED AST2400 BMC Input/Output
LAN:
- 2 x RJ45 10GBase-T LAN Ports
- 1 x RJ45 Dedicated IPMI LAN Port
USB:
- 2 x USB 3.0 Port (Rear)
- 2 x USB 2.0 Ports (Rear)
- 1 x Type A
VGA: 1 x VGA Port
Serial Port/Header: 1 x Fast UART 16550 Port / 1 Header Front Panel
Buttons:
- Power On/Off Button
- System Reset Button
LEDs:
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED Expansion Slots
PCI-Express:
- 1 PCI-E 3.0 x16 slot
- 3 PCI-E 3.0 x8 slots
- Slot 3 4 occupied by controller and JBOD Expansion Port Drive Bay
Hot-Swap: 16x3.5 Hot-Swap SAS3/SATA3 Drive Bays
Optional OS Drive: 2x2.5 Optional Rear Hot-Swap 2.5 Drive Bays Backplane
SAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots and 2x mini-SAS HD connectors for JBOD expansion System Cooling
Fans:
- 2 x 80mm Hot-swap rear exhaust Cooling Fans
- Redundant Cooling Power Supply with Power Distributor
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input: 100 to 240V 50/60Hz 11-4.5Amp
DC Output:
- 4 Amp at +5V Standby / 75 Amp at +12V
Certification: 80Plus Platinum Certified System BIOs
BIOs Type: 128MB SPI Flash EEPROM with AMI BIOs
BIOs Features:
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard Support
- SMBIOS 2.3
- UEFI Operating Environment / Compliance
RoHS: RoHS Compliance
Environmental Specs:
- Operating Temperature: 10 C to 35 C (50 F to 95 F)
- Non-Operating Temperature: -40 C to 70 C (-40 C F to 158 F)
Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-Operating Relative Humidity: 5% to 95% (Non-Condensing) Form Factor
3U Rackmount Item Dimension (L"xW"xH")
26 x 18 x 6

Weight
79.00 lb

Warranty Information
1 Year