Engenius RA47036 Networking Eap1300ext Enturbo 11ac Wave 2 Indoor Wireless Access Point With High-gain Antennas Retail

EnTurbo APs turbocharge wireless performance for small and mid-size businesses. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, and performance, offering greater user device capacity and connection reliability. EAP1300 delivers next generation, business-class Wi-Fi at exceptional pricing.


Quad-Core Processor, 717 MHz Turbo Engine

11ac Wave 2 Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)

Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs

GigE 802.3af PoE-Compliant for Easy Placement Where Power is Limited

Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients

Standards
IEEE 802.11b/g/n on 2.4 GHz
IEEE802.11a/n/ac on 5 GHz
Processor
Qualcomm 717 MHz Quad-Core CPU
4x ARM Cortex A7
Antennas
2 x 5 dBi Omni-Directional Integrated
Physical Interface
10/100/1000 Gigabit Ethernet Port
DC Jack
Reset Button
Kensington Security Slot
LED Indicators
Power
LAN
2.4 GHz
5 GHz
Power Source
Power-over-Ethernet: 802.3af Input
IEEE 802.11e Compliant Source
12VDC /1A Power Adapter
Maximum Power Consumption
9W
Surge Protection
0.5KV
Wireless and Radio Specifications
Operating Frequency: Dual-Radio Concurrent 2.4 GHz and 5 GHz
Operation Modes:
- Access Point Mode (AP mode)
- WDS: WDS AP, WDS Bridge
Frequency Radio:
- 2.4 GHz: 2400 MHz to 2472 MHz
- 5 GHz: 5150 MHz to 5250 MHz, 5250 MHz to 5350 MHz, 5470 MHz to 5725 MHz, 5725 MHz to 5850 MHz
Transmit Power:
- 2.4 GHz: 23 dBm
- 5 GHz: 23 dBm
Radio Chains/Spatial Stream: 2x2:2
SU-MIMO: Two (2) Spatial Streams SU-MIMO up to 1267 Mbps to a single client
MU-MIMO: Two (2) Spatial Streams MU-MIMO up to 1267 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps):
- 2.4 GHz: Max 400
- 5 GHz: Max 867
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 36, 48, 54
- 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS 1 to 2)
Supported Radio Technologies:
- 802.11b: Direct-Sequence Spread Spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
- 802.11n/ac: 2x2 MIMO with 2 Streams
Channelization:
- 802.11ac Supports Very High Throughput (VHT) - VHT 20/40/80 MHz
- 802.11n Supports High Throughput (HT) - HT 20/40 MHz
- 802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio - VHT 40 MHz (256-QAM)
- 802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
Multiple BSSID: Supports 16 SSIDs (8 SSIDs per Band)
VLAN Tagging:
- Supports 802.1q SSID-to-VLAN Tagging
- Cross-Band VLAN Pass-Through
- Management VLAN
Spanning Tree: Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service):
- Compliant With IEEE 802.11e Standard
- WMM
SNMP: v1, v2c, v3
MIB: I/II, Private MIB
Management Features
Deployment Options:
- Stand-Alone (Individually Managed)
- Managed Mode (w/ezMaster and Neutron Switch)
Stand-Alone Management Features:
- Auto Channel Selection
- Auto Transmit Power
- Wireless STA (Client) Connected List
- Guest Network
- Fast Roaming (802.11k and 802.11r)
- Pre-Authentication (802.11i, 802.11x)
- PMK Caching (802.11i)
- RSSI Threshold
- Band Steering
- Traffic Shaping
- VLANs for Access Point - Multiple SSIDs
- Backup/Restore Settings
- Auto Reboot
- E-Mail Alert
- Site Survey
- Save Configuration as Default
Control Features:
- Managed Mode (w/ezMaster/Neutron Switch)
- Distance Control (ACK Timeout)
- Multicast Supported
- Wi-Fi Scheduler
- Client Traffic Status
- RADIUS Accounting (802.1x)
- Power Save Mode (U-APSD Support)
- CLI Support
- HTTPS
Wireless Security:
- WEP Encryption 64/128/152 bit
- WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
- Hide SSID in Beacons
- MAC Address Filtering, Up to 32 MACs per SSID
- Wireless STA (Client) Connected List
- SSH Tunnel
- Client Isolation
Wireless Management Features (w/ezMaster and Neutron Switch) (Available in AP Mode)
- AP Auto Discovery and Provisioning
- AP Auto IP Assignment
- AP Group Management
- Auto AP Rebooting
- AP Device Name Editing
- AP Radio Settings
- Band Steering
- Traffic Shaping
- Fast Roaming (802.11k and 802.11r)
- Pre-Authentication (802.11i, 802.11x)
- PMK Caching (802.11i)
- RSSI Threshold
- AP Client Limiting
- Client Fingerprinting
- AP VLAN Management
- VLANs for AP - Multiple SSIDs
- Secured Guest Network
- Access Point Status Monitoring
- Wireless Client Monitoring
- Email Alert
- Wireless Traffic and Usage Statistics
- Real-Time Throughput Monitoring
- Visual Topology View
- Floor Plan View
- Map View
- Wireless Coverage Display
- Secure Control Messaging (SSL Certificate)
- Local MAC Address Database
- Remote MAC Address Database (RADIUS)
- Unified Configuration Import/Export
- Bulk Firmware Upgrade Capability
- One-Click Update
- Intelligent Diagnostics
- Kick/Ban Clients
- Wi-Fi Scheduler
Temperature Range
Operating: 32^o F to 104^oF (0^o C to 40^oC)
Storage: -22^oF to 176^oF (-30^oC to 80^oC)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Package Contents
EAP1300 Indoor Access Point
Power Adapter (12V/1A)
T-Rail Mounting Kits
Ceiling and Wall Mount Screw Sets
Mounting Brackets
RJ-45 Ethernet Cable
Quick Installation Guide
Certifications
FCC, CE
Item Dimension (L inchxW inchxH inch)
12 x 9 x 3

Weight
2.00 lb

Warranty Information
1 Year