Supermicro SSG-2026T-DE2R24L System Ssg 2026t De2r24l 2u Xeon 5600 5500 24x2.5inch Hotswap 1200w Redundant 80plus Gold

Server Type
2U Rackmount Number of CPU Socket
2 Memory Dimms
6 HDD Bays
24 x 3.5inch Expansion Slots
3 Power Supply
1200W (1+1) Redundancy Form Factor
Chassis: Supermicro CSE-927ETS 2U Rackmount Chassis Motherboard
2x Super X8DTS-F-2U Processor
Dual 1366-pin LGA Sockets
Support Intel QPI system bus speed up to 6.4 GT/s
Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
Intel Xeon Processor 5600 Series (Westmere)
Intel Xeon Processor 5500 Series (Nehalem-EP) System Memory
6x DDR3 240-pin DIMM sockets
Support up to 96GB of ECC Registered DDR3-1333/1066/800MHz memory
Support up to 24GB of unbuffered DDR3-1333/1066/800MHz memory
Support 1.5V 1.35V memory voltage
Error Detection:
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC) Integrated On-Board Device
Chipset:
- Intel 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
- SAS/SATA: LSI 6Gbps SAS 2008
- SAS2 Expander
- Scalability through cascading
-6Gb SAS2/SATA2 HDD support
- Inband SES-2 Enclosure Management
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
Network Controllers:
- Intel 82599EB controller for Dual 10 Gigabit Ethernet interconnection between nodes
- Intel 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
Graphics:
- Matrox G200eW 16 MB DDR2
Super I/O:
- Winbond 83827HF chip Expansion Slot
3x PCI-E 2.0 x8 slots (can be used for host or storage expansion) Input/Output
SAS: 4x 6Gbps JBOD expansion ports
LAN: 2x RJ45 LAN ports
USB: 2x USB rear ports (via KVM cable), 1x USB on-board (TypeA)
Graphics: 1x VGA port (via KVM cable)
Serial port Header: 1 console port (via KVM cable) Front Panel
Buttons: Power On/Off, System Reset buttons, Alarm Mute Switch.
LEDs: Power, Hard drive, 2x Networking, System Overheat, Power Fail LED Drive Bay
24x Hot-swap 2.5" Drive Bays shared between server nodes
SAS or enterprise SATA HDD only recommended System BIOS
32Mb SPI Flash EEPROM with AMI BIOS Power Supply
1200W high-efficiency Redundant power supplies with PMBus
High-efficiency with 80 PLUS Gold Certified System Cooling
12 x PWM Fans Parts List (Included Items)
Motherboard/Chassis: 2 x Super X8DTS-F-2U Motherboard (MBD-X8DTS-F-2U) / 1 x 2U Chassis (CSE-927ETS)
Add-On Card: 2 x AOM-SAS2-L8-O-P (AOM-SAS2-L8-O-P)
Backplane: 1 x SC927 24 x 2.5HDD BPN (BPN-SAS-927)
Cable 1: 2 x 11.5CM KVM/SUVI 36PIN TO 9PIN/15PIN/2USB (CBL-0218L)
CD: 1 x For X8 series (CDR-X8)
Power Distributor: 2 x 1200W 1U GOLD LEVEL PWS WITH PM BUS (PDB-PT927-SG)
Power Supply: 2 x 1200W 1U GOLD LEVEL PWS WITH PM BUS (PWS-1K21P-1R)
Riser Card: 2 x RSC-R2UT-2E4E8R-SS026 (RSC-R2UT-2E4E8R-SS026)
Heatsink/Retention: 4 x 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP) (SNK-P0037P)
Cable 2: 2 x 16pin control panel converter cable for SC826,846, 22cm, PBF (CBL-0217L)
Fan 1: 6 x 40x56, 4 Pin PWM Fan Assembly for SC513F, 515, 823M (FAN-0088L4)
Mounting Rails: 1 x Rail set, quick/quick, default for 4U 17.2 (MCP-290-00057-0N)
Trays: 24 x Support 2.5 SATA/SAS/SSD HDD tray with LSI converter bkt (MCP-220-92701-0N
Trays: 1 x SC927 2U motherboard tray supporting 3LP (MCP-220-92702-0N)
Add-On Card (Optional): L3-25111-00C LSISS9252 SAS-TO-SATA INTERPOSER, 2.5"/3.5" HD (AOC-LSISS9252) Item Dimension (L"xW"xH")
26.75 x 17.2 x 3.5

Weight
85.00 lb

Warranty Information
1 Year