Supermicro SYS-7048R-C1R(3YR) System Sys-7048r-c1r(3yr) 4u E5-2600v3 Lga2011 C612 Ddr4 Sata Pci Express 920w Brown Box

Processor/Cache
CPU :
Intel Xeon processor E5-2600 v4(BIOS version 2.0 or above is required)/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache : Up to 22 Cores / Up to 55MB Cache
System Bus : QPI up to 9.6 GT/s System Memory
Memory Capacity :
16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512 ECC RDIMM
Memory Type : 2400(BIOS version 2.0 or above is required)/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes :
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage : 1.2 V
Error Detection : Corrects single-bit errors On-Board Devices
Chipset : Intel C612 chipset
SATA : SATA3 (6Gbps) RAID 0, 1, 5, 10
SAS : LSI 3108 SAS3 (12Gbps) controller HW RAID 0, 1, 5, 6, 10, 50, 60
IPMI :
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers :
Intel i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video : ASPEED AST2400 BMC Input / Output
SATA : 8x SATA3 (6Gbps) ports
SAS : 8x SAS3 (12Gbps) ports
LAN :
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB :
2x USB 3.0 ports (2 rear)
4x USB 2.0 ports (2 rear, 2 front)
1x USB Type A
Video : 1x VGA port
Serial Port / Header : 1x COM/Serial
DOM : 2x SuperDOM (Disk on Module) ports BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI Chassis
Form Factor :
4U Rackmountable / Tower
Optional Rackmount Kit
Model : CSE-745TQ-R920B Front Panel
Buttons :
Power On/Off button
System Reset button
LEDs :
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power Fail LED
Ports : 2x USB Ports Drive Bays
Hot-swap :
8x 3.5 inch Hot-swap SATA3 drive trays
8x 2.5 inch Hot-swap SAS3 drives in mobile rack
Peripheral Bay : 1x 5.25 inch drive bay (optional devices) SAS / SATA Backplane
SAS via backplane (BPN-SAS3-I28A) in Mobile rack
SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P Fans
3x 8cm Hot-swap redundant PWM Cooling Fans
2x 8cm Hot-swap Rear Exhaust PWM Fans and air shroud Power Supply with Power Distributor
920W high-efficiency (94 percent+) AC-DC Redundant power supplies with PMBus and I2C
AC Input : 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output :
4 Amp at +5V standby
75 Amp at +12V CPU
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator FAN
Total of five fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 5x fan connectors
Thermal Monitor 2 (TM2) support
PECI LED
System info. LED: UID indicator, fan fail/System Overheat
Suspend static indicator LED
UID/Remote LED Other Features
Chassis intrusion detection
Chassis intrusion header RoHS
RoHS Compliant Environmental Spec.
Operating Temperature : 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature : -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity : 8 percent to 90 percent (non-condensing)
Non-operating Relative Humidity : 5 percent to 95 percent (non-condensing) Item Dimension (L inchxW inchxH inch)
26 x 18 x 8

Weight
74.00lb

Warranty Information
3 Year