Received! Our sales team will contact you soon.

Supermicro SYS-6028TP-DNCTR System Sys-6028tp-dnctr 2u E5-2600v3 Lga2011 Ddr4 Sata Pci-express 1600w Retail

Make an offer
Supermicro SYS-6028TP-DNCTR System Sys-6028tp-dnctr 2u E5-2600v3 Lga20
Out of Stock

Special Price $3285.10 Regular Price $4434.89

Condition: New
Supermicro
SUPERMICRO
Free Shipping for this Item


Supermicro SYS-6028TP-DNCTR System Sys-6028tp-dnctr 2u E5-2600v3 Lga20

Motherboard (Two per System)
Super X10DRT-PT Processor/Cache (per Node)
CPU
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 22 Cores / Up to 55MB Cache
System Bus
QPI up to 9.6 GT/s
Note
BIOS version 2.0 or above is required
Note
Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. System Memory (per Node)
Memory Capacity
16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors On-Board Devices (per Node)
Chipset
Intel C612 chipset
SAS
Broadcom 3008 SAS3 (12Gbps) controller
RAID 0, 1, 10 support
Note: In order to support NVMe drives, both CPU socket must be populated
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
ASPEED AST2400 BMC Input / Output (per Node)
SAS
6x SAS3 (12Gbps) ports
LAN
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 3.0 ports total (2x rear)
VGA
1x VGA port
Serial Port / Header
1x Fast UART 16550 port / 1 Header (internal)
Others
1x mSATA (full size) and one SATADOM support on the daughter card
1x SATADOM support on the motherboard Chassis
Form Factor
2U Rackmount
Model
CSE-827HD+-R1K68B
Available Colors
Black Front Panel
Buttons
Power On/Off button
UID button
LEDs
Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED Expansion Slots (per Node)
PCI-Express
1x PCI-E 3.0 x16 slot
1x PCI-E 3.0 x8 slot Drive Bays (per Node)
Hot-swap
6x 3.5" Hot-swap drive bays:
Up to 4x NVMe + 2x SAS3 or 6x SAS3
Note: NVMe support requires 2 CPUs installed System Cooling
Fans
4x 8cm heavy duty PWM fans with optimal fan speed control Power Supply (76mm Width)
1600W 1U Redundant Power Supplies with PMBus
Total Output Power
800W/1600W
Dimension (W x H x L)
76 x 40.4 x 336 mm
Input
100-140Vac / 10-7A / 50-60Hz
180-240Vac / 11-8A / 50-60Hz
+12V
Max: 67A / Min: 0A (100-140Vac)
Max: 133A / Min: 0A (180-240Vac)
+5Vsb
Max: 1A / Min: 0A
Output Type
27 Pairs Gold Finger Connector
Certification
Titanium Level Certified96% Titanium Level System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature: 10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L"xW"xH")
NA

Weight
85 lbs

Warranty Information
3 Years
  • Manufacturer:
  • Model Number:
  • Condition:
  • Weight:
  • Dimensions:
  • Updated:
  • Added:
  • Supermicro
  • SYS-6028TP-DNCTR
  • New
  • 85.00lbs
  • 5 X 5 X 5
  • Jun 28, 2024
  • Jan 07, 2015

Request For Quote.


Supermicro SYS-6028TP-DNCTR System Sys-6028tp-dnctr 2u E5-2600v3 Lga2011 Ddr4 Sata Pci-express 1600w Retail

Write a Review