Brocade BR-AP651160010US Mobility Ap 6511 Series Sgl Radio 80211a B G N

MOBILITY AP 6511 SERIES SGL RADIO 802.11A/B/G/N
Conventional Access Points (APs) require careful planning, in addition to pulling cable and installing ceiling brackets. Sometimes organizations need wireless connectivity installed in minutes, not hours. The Brocade Mobility 6511 Wallplate Access Point (AP) integrates a dual-band 802.11 a/b/g/n AP and switched Fast Ethernet connectivity into a sleek design that is fast and easy to deploy on any wall surface or structured wiring telecom box using the existing CAT 5/6 cabling. The Brocade Mobility 6511 AP is ideal for dormitories, patient rooms, guest rooms, and other multi-dwelling units where firewalls, metal doors, mirrors, plumbing, and wall tiles obstruct hallway Wi-Fi signals. It features a snap-in port for any keystonestyle connector - such as RJ11 or TV coax - so multiple services can be supported on a single integrated AP. Guest rooms often require additional Ethernet ports for voice service, device monitoring, or even guest wireline. A snap-on three-port wired Fast Ethernet expansion module dramatically reduces deployment costs by providing multiple wired Ethernet switch ports while eliminating multiple CAT 5/6 cables to a single room. The Brocade Mobility 6511 AP provides enterprises and branch offices with key functions, including♊.1X and firewall capabilities on wireless and wired ports, intrusion prevention, fast roaming, and Quality of Service (QoS) traffic handling.
*
MAIN SPECIFICATIONS
Product Description Brocade Mobility 6511 Wireless LAN Access Point Single Radio - wireless access point
Device Type Wireless access point
Enclosure Type External
Dimensions (WxDxH) 5 in x 2.8 in x 1.1 in
Weight 7.1 oz
Localization United States
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Network / Transport Protocol PPPoE, FTP
Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Frequency Band 2.4 GHz, 5 GHz
Capacity Virtual interfaces (VLANs) : 4095
Features Firewall protection, NAT support, BOOTP support, ARP support, dynamic DNS server, DiffServ support, DFS support, Intrusion Prevention System (IPS), IP address filtering, firmware upgradable, Wireless Intrusion Detection System (WIDS), IPSec Virtual Private Network (VPN), Wi-Fi Multimedia (WMM) support, SpectraLink Voice Priority (SVP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), DHCP server, Multiple SSID support, 2T2R MIMO technology, LLDP support, Direct Sequence Spread Spectrum (DSSS), SNMP trap, DHCP client, Management Information Base (MIB)
Power DC -36 -57 V
General
Device Type Wireless access point
Width 5 in
Depth 2.8 in
Height 1.1 in
Weight 7.1 oz
Localization United States
Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 600 Mbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Spread Spectrum Method OFDM, DSSS
Network / Transport Protocol PPPoE, FTP
Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Frequency Band 2.4 GHz, 5 GHz
Capacity Virtual interfaces (VLANs) : 4095
Status Indicators Power, error
Features Firewall protection, NAT support, BOOTP support, ARP support, dynamic DNS server, DiffServ support, DFS support, Intrusion Prevention System (IPS), IP address filtering, firmware upgradable, Wireless Intrusion Detection System (WIDS), IPSec Virtual Private Network (VPN), Wi-Fi Multimedia (WMM) support, SpectraLink Voice Priority (SVP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), DHCP server, Multiple SSID support, 2T2R MIMO technology, LLDP support, Direct Sequence Spread Spectrum (DSSS), SNMP trap, DHCP client, Management Information Base (MIB)
Encryption Algorithm DES, Triple DES, 128-bit WEP, 40-bit WEP, TLS, PEAP, TTLS, TKIP, AES-CCMP, 128-bit AES, 256-bit AES
Authentication Method LDAP, Active Directory
Compliant Standards IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.1ab (LLDP), IEEE 802.11k
Antenna
Antenna Qty 2
Expansion / Connectivity
Interfaces 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
Cables Included 1 x network cable - 2 in
Mounting Kit Included
Compliant Standards CE, C-Tick, EN55022, EN55024, ICES-003 Class B, EN 300.328, FCC PartΓ B, FCC Part 15.247, IC, UL 2043, FCC, RoHS, UL 60950-1 Second Edition, EN 301.893, FCC Part 15.407
Power
Voltage Required DC -36 -57 V
Power Consumption Operational 5 Watt
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 - 95% (non-condensing)