Supermicro SYS-2028TP-DNCTR System Sys-2028tp-dnctr 2u Xeon E5-2600 V4v3 S2011 8x2.5sas 1600w Brown Box

Motherboard
Super X10DRT-PT
Processor/Cache (per Node)
CPU:Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache:Up to 22 Cores / Up to 55MB Cache
System Bus:QPI up to 9.6 GT/s
Note: BIOS version 2.0 or above is required
Note: Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory (per Node)
Memory: Capacity:16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type:2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage:1.2 V
Error Detection:Corrects single-bit errors
On-Board Devices
Chipset:Intel C612 chipset
SAS:Broadcom 3008 SAS3 (12Gbps) controller RAID 0, 1, 10 support
Note: In order to support NVMe drives, both CPU socket must be populated
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers:Intel X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics:ASPEED AST2400 BMC
Input / Output (per Node)
SAS:8 SAS3 (12Gbps) ports
LAN:2 RJ45 10GBase-T ports
1 RJ45 Dedicated IPMI LAN port
USB:2 USB 3.0 ports (rear)
VGA:1 VGA port
Serial Port / Header:1 Fast UART 16550 port / 1 Header (internal)
Others:1 mSATA (full size) and one SATADOM support on the daughter card
1 SATADOM support on the motherboard
Chassis
Form Factor:2U Rackmount
Model:CSE-217HD+-R1K68B
Dimensions and Weight
Available Colors:Black
Front Panel
Buttons:Power On/Off button
UID button
LEDs:Power status LED
HDD activity LED
2 Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express:1 PCI-E 3.0 x16 slot
1 PCI-E 3.0 x8 slot
Drive Bays (per Node)
Hot-swap:8 Hot-swap 2.5" SAS HDD Bays
4 Hot-swap 2.5" Bays support NVMe
Note: NVMe support requires 2 CPUs installed
System Cooling
Fans:4 heavy duty 8cm PWM fans with optimal fan speed control
Power Supply (76mm Width)
1600W 1U Redundant Power Supplies with PMBus
Total Output Power:800W/1600W
Dimension(W x H x L):76 x 40.4 x 336 mm
Input:100-127Vac / 10-7A / 50-60Hz
200-240Vac / 11-8A / 50-60Hz
+12V:Max: 66A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)
+5Vsb:Max: 1A / Min: 0A
Output Type:27 Pairs Gold Finger Connector
Certification: UL/cUL/CB/BSMI/CE/CCC
Titanium Level
System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS:RoHS Compliant
Environmental Spec.:Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L inchxW inchxH inch)
34 x 23 x 14 Weight
85.00lb Warranty Information
1 Year