Startech C6ASPAT14GR 14ft Cat6a Ethernet Cable - 10 Gigabit Category 6a Shielded Snagless 100w Poe Patch Cord - 10gbe Gray Ul Certified Wiringtia - Cat6a Ethernet Cable Delivers 10 Gigabit Connection Free Of Noise Amp; Emirfi Interference - Tested To Comply W Ansitia-568-d Category 6 Requirements - 26 Awg Stranded 100% Copper Ul Rated Wire (e132276-a) - 100w Poe - Snagless Shielded Patch Cord

Each cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks.

Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amount of EMI.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.

For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.

Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.

The C6ASPAT14GR is backed by StarTech.com's lifetime warranty for guaranteed reliability.

• Molded
• Stranded
• EMI/RF Protection
• Booted
• Strain Relief
• PoE
• Damage Resistant
• Break Resistant
• Corrosion Resistant

• Network Device
• Switch
• Hub
• Router
• Patch Panel
• Computer
• Print Server

• TIA/ETL-568-B2.10
• UL 444