Cart Empty
Airmar 175WR-4 175wr-4 Transducer Housing Wrench
1 Available
Special Price $41.90 Regular Price $56.57
Condition: New
Special Price $41.90 Regular Price $56.57
Condition: New
175WR-4 Transducer Housing Wrench
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.
For use with:
IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16".
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.
For use with:
- B164
- B175
- SS164
- SS264
IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16".
175WR-4 Transducer Housing Wrench
A single-handed wrench that holds the main thru-hull housing via the wrench flats on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.
For use with:
IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16.
A single-handed wrench that holds the main thru-hull housing via the wrench flats on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.
For use with:
- B164
- B175
- SS164
- SS264
IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16.
- Manufacturer:
- Model Number:
- Condition:
- Weight:
- Dimensions:
- Updated:
- Added:
- Country of Origin:
- Airmar
- 175WR-4
- New
- 0.85lbs
- 10 X 1 X 5
- Dec 17, 2024
- Jun 05, 2018
- UNITED STATES
Request For Quote.
Airmar 175WR-4 175wr-4 Transducer Housing Wrench
