Supermicro MBD-X11SSI-LN4F-O(3YR) Mb Mbd-x11ssi-ln4f-o(3yr) E3-1200v5 S1151 H4 C236 Pcie Sata Atx Rtl

Physical Stats
Form Factor
ATX
Dimensions
12" x 9.6" (30.48cm x 24.38cm)
Processor/Cache
CPU
Intel 7th/6th Generation Core i3 series, Intel Celeron, Intel Pentium, Intel Xeon processor E3-1200 v6/v5.
Single Socket H4 (LGA 1151) supported, CPU TDP support 80W
Note
BIOS version 2.0 or above is required to support 7th Generation Intel Core i3 Processors and Intel Xeon Processor E3-1200 v6 series
System Memory
Memory Capacity
64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
4GB, 8GB, 16GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
On-Board Devices
Chipset
Intel C236
SATA
Intel C236 controller for 6 SATA3 (6 Gbps) ports RAID 0,1,5,10
IPMI
ASPEED AST2400 BMC
Network Controllers
Quad LAN with Intel Ethernet Controller I210-AT
Graphics
Aspeed AST2400 BMC
Input / Output
USB
6 USB 2.0 ports (2 rear + 4 headers)
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
Video Output
1 VGA port
Serial Port / Header
2 COM Ports (1 rear, 1 header)
TPM
TPM Header
Expansion Slots
PCI-E
1 PCI-E 3.0 x8,
1 PCI-E 3.0 x8 (in x16 slot),
1 PCI-E 3.0 x4 (in x8 slot)
M.2
M.2 Interface: PCI-E 3.0 x4 and SATA
Form Factor: 2242, 2260, 2280, 22110
Key: M-Key
Double Height Connector
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
ACPI 1.0 / 2.0 / 3.0 / 4.0
APM 1.2
DMI 2.3
PCI 2.3
Plug and Play (PnP)
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
USB Keyboard support
Management
Software
Intel Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Power Configurations
ACPI Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
+12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
FAN
5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
Temperature
Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED
CPU / System Overheat LED, UID/Remote UID
Other Features
Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, WOL
Operating Environment
Operating Temperature Range
0^oC - 50^oC (32^oF - 122^oF)
Non-Operating Temperature Range
-40^oC - 70^oC (-40^oF - 158^oF)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)
Item Dimension (L"x W"x H")
12 x 10 x 2
Weight
2.00 LB
Warranty Information
3 years