Shuttle DS67U7 System Intel 2.5ghz Core I7-6500u Max 32gb Fanless Slim Pc Retail

Fanless and Silent
Fanless and Silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free Low Power Consumption
Power consumption in idle mode: 10-12 W (depends on peripherals)
Power consumption in S3 sleep mode: 0.8 W
(measured with 2x 4 GB DDR3L-1600 SO-DIMMs and 500 GB 2.5" hard disk under Windows 10 64-bit) 24/7 Nonstop Operation
Requirements:
Free circulation of air amongst the PC must be guaranteed.
Ventilation holes must stay clear.
If a hard disk is installed, this must also be approved for permanent operation by its manufacturer Chassis
Slim-PC (Nettop) with black chassis made of steel
Without cooling fan, passive cooling only
The bays for memory, 2.5" drive and M.2 card can be easily accessed by removing two cover plates.
Two holes for Kensington Lock and numerous threaded holes (M3) at both sides of the chassis Operation Position
1) Vertical: Usually operated in vertical position with the supplied feet (DisplayPort output facing up).
2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit. Operation System
This barebone system comes without operating system.
It is compatible with Windows 10, Windows 8.1, Windows 7 and Linux
Supports 64-bit operating systems Processor
Model: Intel Core i7-6500U (ULV)
System-on-a-chip architecture (SoC): no chipset required
Code name: Skylake-U (6th Generation Intel Core)
Cores / Threads: 2 / 4
Clock rate: 2.5-3.1 GHz (basic clock / turbo clock)
L1/L2/L3 Cache: 128 kB / 512 kB / 4096 kB
Memory controller: DDR3L-1600 Dual Channel (1.35V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100^oC
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 Integrated Graphics
Intel HD graphics 520 (Intel HD Gen. 9)
Two digital audio/video ports support two independent screens:
1) DisplayPort 1.2supports 4096x2304 at 60Hz
2) HDMI 1.4 supports 4096x2304 at 24Hz
Supports Ultra HD / 4K resolution
GPU clock rate: 300-1050 MHz
Execution Units (EU): 24
Supports DirectX 12, OpenGL 4.4
Supports full h264, h265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Supports HD video plus multi-channel digital audio via a single cable
Dynamic, shared memory: up to 1.7 GB Mainboard BIOS
Shuttle Mainboard FS67
All capacitors are high quality solid capacitors
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports boot from M.2 SSD cards, USB devices and SD card reader
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports hardware monitoring and watch dog function
Supports Unified Extensible Firmware Interface (UEFI) Power Adapter
External 65 W power adapter (fanless)
Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC Connector: 5.5/2.5mm (outer/inner diameter) Memory Support
2x SO-DIMM slots with 204 pins
Supports DDR3L-1600 (PC3-12800) SDRAM at 1.35V
Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB
Supports two unbuffered DIMM modules (no ECC or registered)
Caution: This mainboard does only support 1.35V DDR3L memory modules.
DDR3L has a lower operation voltage compared to DDR3 Audio
Audio Realtek ALC 662 High-Definition Audio
Two analog audio connectors (3.5mm) at the back panel:
1) 2 channel line out (headphones)
2) microphone input
Digital multi-channel audio output: via HDMI and DisplayPort Dual Gigabit LAN
Dual network with two RJ45 ports
Used network chips :
1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
2) Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode Wireless Network (WLAN)
WLAN expansion card (M.2-2230-AE) with two external antennas
One antenna for WLAN, the second antenna is for Bluetooth (supplied)
Chip: Realtek RTL8821AE
Supports Wireless LAN IEEE 802.11b/g/n/ac 1T1R, 2,4 GHz or 5 GHz
Max. speed: 150 Mbps (2.4 GHz) or 433 Mbps (5 GHz)
Supports Bluetooth 4.0 M.2 Slot for SSD
The M.2 2242 BM slot provides the following interfaces:
PCI-Express Gen. 2.0 X4 with up to 16 Gbps Data Transfer Speed
SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm and a length of 42 mm (type 2242)
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key) 2.5" Drive Bay with SATA connector
Supports one Serial ATA hard disk or one SATA SSD drive in 6.35cm/2.5" format
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Supports Unified Extensible Firmware Interface (UEFI) Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Supports booting from SD card Front Panel Connectors
2x USB 3.0
2x USB 2.0
2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485) covered with black plastic caps
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue)
HDD LED (yellow) Back Panel Connectors
DisplayPort 1.2
HDMI 1.4
2x USB 2.0
2x Gigabit LAN (RJ45)
Microphone input
Audio Line-out (headphones)
DC-input connector for external power adapter
4-pin connector "SW2" (2.54 mm pitch) for power button, Clear CMOS and 5V DC
2x RP-SMA connectors for external Wireless LAN antennas (antennas are supplied) Always-On Jumper
By removing Jumper J9 (please refer to the quick user guide) the system will start unconditionally once power is applied.