Tripp APS750 , Powerverter, Aps 750w, Inverter Charger, Auto-transfer Switching, 2 5-15r Outlets

<b>Output</b><br>Nominal Output Voltage Supported: 120V<br>Frequency Compatibility: 60Hz<br>Output Receptacles: (2) 5-15R<br>Output: 750W<br>Continuous Output Capacity: 750W<br>Peak Output Capacity: 1500W<br>Output Voltage Regulation: LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%)<br>Output Frequency Regulation: 60Hz (+/-0.3 Hz)<br>Overload Protection: Includes 6A AC input breaker dedicated to the charging system and 8A output breaker for AC output loads <b>Input</b><br>Nominal Input Voltage Supported: 120V AC<br>Recommended Electrical Service: DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120V AC recommended<br>Maximum Input Amps/Watts: DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8 amps at 120VAC with full inverter and charger load (4.2A max charger-only)<br>Input Connection Type: DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug<br>Voltage Compatibility: 120V AC<br>Voltage Compatibility: 12V DC <b>Battery</b><br>Expandable Battery Runtime: Runtime is expandable with any number of user supplied wet, gel or SLA batteries<br>DC System Voltage: 12V DC<br>Battery Charge: 20A<br>Expandable Runtime: Yes <b>User Interface, Alerts and Controls</b><br>Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.<br>Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterrupted <b>Surge / Noise Suppression</b><br>AC Suppression Joule Rating: 450 <b>Physical</b><br>Cooling Method: Multi-Speed Fan<br>Material of Construction: Polycarbonate<br>Receptacle Color: Black<br>Form Factor Supported: Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) <b>Environmental</b><br>Relative Humidity: 0 to 95% Non-Condensing <b>Line / Battery Transfer</b><br>Transfer Time (Line Power to Battery Mode): 16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)<br>Low Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)<br>High Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual) <b>Special Feature</b><br>Remote Control Capability: Yes <b>Package Contents</b><br>APS750 750W PowerVerter APS 12V DC 120V AC Inverter/Charger<br>Owners Manual <b>Item Dimension (L"xW"xH")</b><br>13 x 11 x 11<br><br><b>Weight</b><br>18.60 lb<br><br><b>Warranty Information</b><br>1 Year Limited