Acti Q13-K1 Cameres Q13-k1 2mp Outdoor Fisheye Covert With Basic Wdr F1.19mm F2.0 H.264 Retail

Device
Device Type: Indoor Fisheye Covert Camera
Image Sensor: Progressive Scan CMOS
Sensor Size: 1/2.8"
Effective Pixels: 1944(H) x 1224(V) (2.38 MP)
Horizontal Resolution: 1100 TVL
Day / Night: No
Low Light Sensitivity: Superior
Minimum Illumination: Color: 0.1 lux at F2.0 (30 IRE, 2400K)
Mechanical IR Cut Filter: No
IR Sensitivity Range: No
Electronic Shutter: 1/5 to 1/32,000 sec (manual mode), 1/5 to 1/32,000 sec (auto mode)
S/N Ratio: 52 dB Lens
Focal Length / Aperture: Fixed focal, f1.19mm / F2.0
Iris: Fixed iris
Focus: Fixed focus
Cable Type: RJ12 connector up to 12m from main unit
Horizontal Viewing Angle: 182^o (overview area), 111^o (high detail area) Video
Compression: H.264 (Baseline / Main / High profile), MJPEG
Max. Frame Rate vs. Resolution: 30 fps at 1440 x 1080, 30 fps at 1280 x 960, 30 fps at 800 x 600, 15 fps at 640 x 480, 15 fps at 320 x 240
Multi-Streaming: Simultaneous dual streams based on two configurations
Bit Rate: 28 Kbps - 6 Mbps (per stream)
Bit Rate Mode: Constant, Variable
Image Enhancement: Basic WDR (75 dB), White balance: automatic, hold, and manual, Brightness, Contrast, Sharpness (auto), Auto gain control, Digital noise reduction, Flickerless
Privacy Mask: 4 configurable regions
Text Overlay: User defined text on video
Image Orientation: Image flip and mirror Audio
Compression: 8 kHz, Mono, PCM, 16 bit encoding, G.711
Audio-In: Mic-in and line-in, Terminal block
Audio-Out: Line-out, Terminal block Network
Protocol and Service: TCP, UDP, HTTP, HTTPs, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port: 1, Ethernet (10/100 Base-T), RJ-45 connector
Security: IP address filtering, HTTPs encryption, Password protected user levels, Anonymous login, IEEE802.1X network access control Alarm
Alarm Trigger: Video motion detection (3 regions), External device through digital input, Sound detection
Alarm Response: Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Save video or snapshot to local storage, Upload video or snapshot to FTP, Activate external device through digital output Interface
Digital Input: 1, Terminal block
Digital Output: 1, Terminal block
Serial Port: 1, RS-232
Local Storage MicroSDHC/MicroSDXC memory card slot (card not included) General
Power Source / Consumption: PoE Class 2 (IEEE802.3af) / 4.32 W DC 12V (adapter not included) / 3.6 W
Environmental Casing: Weatherproof (IP66), Vandal resistant (IK09), Vibration proof (EN50155)
Mount Type: Flush
Bundled Accessories: Flush mount (Wall, Ceiling)
Starting Temperature: -20^oC to 50^oC (-4^oF to 122^oF)
Operating Temperature: -30^oC to 60^oC (-22^oF to 140^oF)
Operating Humidity: 10% to 85% RH
Approvals: Camera: CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), EN50155, UL (for optional PoE injector and power adapter), IP66, IK09 Integration
Unified Solution: Fully compatible with ACTi software
ISV Integration: Software Development Kit (SDK) available, ONVIF compliant
Firmware Access Browser: Microsoft Internet Explorer 8.0 or newer (full functionality), Safari with QuickTime installed, and other browsers with VLC installed (partial functionality)
Auto Firmware Upgrade: Yes
GPS Position: Manual Setting Item Dimension (L inchxW inchxH inch)
10 x 8 x 4

Weight
3.30 lb

Warranty Information
3 Year