Supermicro X10SDV-8C-TLN4F-B Mb -x10sdv-8c-tln4f-bulk Fcbga

Physical Stats
Form Factor: Mini-ITX Processor/Cache
CPU: Intel Xeon processor D-1541
FCBGA 1667 supported
CPU TDP support 45W, 12MB, 8 Cores, 16 Threads System Memory
Memory Capacity: 4x DDR4 DIMM sockets
Supports up to 128GB DDR4 ECC RDIMM
Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 32GB, 16GB, 8GB, 4GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors
Detects double-bit errors
(using ECC memory) On-Board Devices
Chipset: System on Chip
SATA: SoC controller for 6 SATA3 (6Gbps) ports RAID 0,1,5,10 RSTe
Network Controllers: Dual LAN via Intel i350-AM2 Gigabit Ethernet
Dual LAN via SoC 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
IPMI: Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: Aspeed AST2400
TPM: TPM header Input / Output
SATA: 6 SATA3 (6Gbps) ports
LAN: 2 RJ45 10GBase-T ports
RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB : 2 USB 3.0 ports (rear)
4 USB 2.0 ports (via headers)
Video: 1 VGA port
Serial Port / Header: 1 COM port (header)
DOM: 1 SuperDOM (Disk on Module) power connector Expansion Slots
PCI-Express: 1 PCI-E 3.0 x16 slot
M.2: Interface: PCI-E 3.0 x4
Form Factor: M Key 2242/2280
Support SATA devices System BIOS
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0
ACPI 5.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.8
UEFI 2.4
RTC (Real Time Clock) Wakeup Management
Software: IPMI 2.0
KVM with dedicated LAN
NMI
SUM
SuperDoctor 5
Watch Dog
Power Configurations: ACPI / APM Power Management
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery PC Health Monitoring
Voltage: Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control
FAN: Total of three 4-pin fan headers supporting tachometer status monitoring
Dual Cooling Zone
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
LED: CPU / System Overheat LED
Other Features: Chassis intrusion detection
Chassis intrusion header
12V DC or ATX Power Source
RoHS Operating Environment
Operating Temperature Range: 0^oC - 60^oC (32^oF - 140^oF) Item Dimension (L"xW"xH")
NA

Weight
5 lb

Warranty Information
1 Year