Supermicro AS-2113S-WTRT As-2113s-wtrt

Motherboard
H11SSW-NT Processor/Chipset
CPU
Single AMD EPYC 7001/7002 series Processor (Board revision 2.x required)
Socket SP3
Supports CPU TDP 225W / cTDP up to 240W
Cores
Up to 32 Cores (Board revision 1.x + 7001 Processors)
Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
System on Chip (SoC) System Memory
Memory Capacity
16 DIMM slots
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
8-channel memory bus
Memory Type
DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs (7001 Processors)
DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
( Board revision 2.x required + 7002 Processors)
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory) On-Board Devices
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers
Broadcom BCM57416 Controller
VGA
ASPEED AST2500 BMC Expansion Slots
PCI Express
1 PCI-E 3.0 x16 (FH/HL) slot
2 PCI-E 3.0 x8 (FH/HL) slots
2 PCI-E 3.0 x8 (LP) slots
M.2
Interface: PCI-E 3.0 x4 (NVMe based)
Form Factor: 2280, 22110
Key: Onboard M-key
Number of M.2: Dual Input / Output
NVMe
Up to 6 U.2 NVMe support via additional cables
SATA
16 SATA3 (6 Gbps) ports
LAN
2x 10GbBase-T LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
5 USB 3.0 ports (4 rear + 1 Type A)
VGA
1 VGA port
Others
1 COM port
2 SATA DOM power connectors
TPM 1.2 header System BIOS
BIOS Type
AMI 128Mb SPI Flash EEPROM
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1 Chassis
Form Factor
2U
Model
CSE-213AC8-R1K23WB Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED / UID LED Drive Bays
Hot-swap
16 hot-swap 2.5" SATA3 drive bays
Optional 6 U.2 NVMe drive support with additional cables Peripheral Drives
Optional
Optional slim DVD-ROM drive Backplane
Hybrid Backplane
Supports up to 8x 2.5" SAS3/SATA3 HDD/SSD and 6x SAS3/SATA3/NVMe Storage Devices System Cooling
Fans
3 heavy-duty PWM fans with optimal fan speed control
Air Shroud
1 Air Shroud Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power
1000W/1200W
Input
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
200-240Vdc / 8.5-7A (for CCC only)
+12V
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
Max: 100A / Min: 0A (200-240Vdc)
+5Vsb
Max: 4A / Min: 0A
Output Type
19 Pairs Gold Finger Connector
Certification
Titanium Level PC Health Monitoring
CPU
Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
CPU switching voltage regulator
FAN
Up to 6-fan status tachometer monitoring
Up to six 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 6x Fan connectors
I²C Temperature Sensing Logic
LED
CPU / System Overheat LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature:
-40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing) Item Dimension (L"xW"xH")
25 x 18 x 4

Weight
59 lbs

Warranty Information
1 year