Acti B412 Cm 3mp Video Analytics Zoom Bullet D N Ir Wdr Slls 10x Zoom Lens Rtl

Device
Product Type: Zoom Bullet
Maximum Resolution: 3MP
Application Environment: Outdoor
Image Sensor: Progressive Scan CMOS
Sensor Size: 1/2.8 "
Effective Pixels: 2065(H) X 1553(V) (3.21 MP)
Day / Night: Yes
Low Light Sensitivity: Superior
Minimum Illumination: Color: 0.1 lux at F1.6 (30 IRE, 2400 K) B/W: 0 lux at F1.6 (IR LED on)
Color to B/W Switch: ISP based switch, configurable
Mechanical IR Cut Filter: Yes
IR Sensitivity Range: 700-1100nm
IR LED: Adaptive IR LED x 10 (850 nm)
IR Working Distance: 60m
Electronic Shutter: 1/5-1/64000second (manual mode) 1/5-1/64000second (auto mode)
Horizontal Resolution (TV Lines): 1450 TVL
S/N Ratio: 56 dB Lens
Focal Length: Zoom, f4.7-47mm
Aperture: F1.6-F3.0
Zoom Ratio: 10x optical
Zoom Application: Camera Installation, Auto Zoom by Event, Manual Operation
Iris: DC iris
Focus: Auto focus
Lens Mount: Board mount
Horizontal Viewing Angle: 58^o - 5.8^o
Vertical Viewing Angle: 45.3^o - 5^o PTZ
Pan, Tilt or Zoom protocol: Visca, Pelco-D, Pelco-P, ACTi URL command Video
Compression: H.265, H.264 (Baseline/ Main/ High profile), MJPEG
Maximum Frame Rate vs. Resolution: 30 fps at 2048 x 1536 60 fps at 1920 x 1080 30 fps at 1280 x 960 60 fps at 1280 x 720 30 fps at 800 x 600 30 fps at 640 x 480 30 fps at 320 x 240
Multi-Streaming: Simultaneous triple streams based on three configurations
Bit Rate: 128Kbps - 12Mbps (per stream)
Bit Rate Mode: Constant, Variable
Wide Dynamic Range: Extreme WDR (145 dB)
Image Enhancement: White Balance, Brightness, Contrast, Saturation, Sharpness, Automatic gain control, Flickerless, Digital Image Stabilizer, Defogging
Digital Noise Reduction: 2D + 3D DNR
Privacy Mask: 32 configurable regions (To be available through future firmware upgrade)
Text Overlay: Yes
Built-in Analytics: Object Based Motion Detection, Tampering Detection, Shock Detection
Server-based Analytics: Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, Direction Detection, Automatic License Plate Recognition, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Image Orientation: Flip, Mirror, Rotation Audio
Audio Type: 2-way, Built-in Microphone, Mic-in, Line-in, Line-out
Audio Compression: 8 kHz, 16 bit encoding, Mono, PCM, G.711 Network
Network Protocol and Service: IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X
Ethernet Port: 1 x RJ-45 connector
Security: IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control Video Analytics Event
Event Trigger: Video motion detection (10 regions) External device through digital input Sound detection
Event Response: Notify control center, Go to Zoom preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Push notification to mobile device, Save video to local storage, Upload video or snapshot to FTP server, Upload video or snapshot to FTP server, Activate external device through digital output Integration
Unified Solution: Fully compatible with ACTi cameras
GPS Position: Manual setting
ONVIF Compliant: Yes, Profile S, Profile G
GB28181 Compliant: Yes
Web Browser: IE 11
Auto Firmware Upgrade: Yes Interface
Audio Interface: Built-in microphone, 1/1, Cable with 3.5mm Phone Jack
Local Storage: MicroSDHC, MicroSDXC memory card slot (card not included)
Digital Input/Output: 1/1 (Cable with Terminal block) General
Power Source: DC 12V, High PoE
Power Consumption: 18.8 W (PoE, heater and IR on), 15.6 W (DC, heater and IR on)
Environmental Casing: Weatherproof (IP67), Vandal proof metal casing (IK10), Built-in dehumidifier
Bundled Accessories: Integrated bracket
Mount Type: Wall Mount, Ceiling Bracket, Pole Mount, Gang Box
Heater: Yes
Dehumidifier: Yes
Starting Temperature: -40^oC - 60^oC (-40^oF - 140^oF) within 30 minutes
Operating Temperature: -40^oC - 60^oC (-40^oF - 140^oF)
Operating Humidity: 10% - 85% RH
Approvals: CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), IP67, NEMA 4X, IK10 (metal casing), UL (for optional PoE injector and power adapter) Item Dimension (L"xW"xH")
15 x 11 x 8

Weight
10 lbs

Warranty Information
3 Year