Supermicro SYS-F628R3-RC1BPT+ System Sys-f628r3-rc1bpt+ 4u Rm E5-2600v4v3 S2011 2tb 8x3.5hs Pci Express Brown Box

Product SKUs
SYS-F628R3-RC1BPT+:
SuperServer F628R3-RC1BPT+ (Black) Motherboard
Super X10DRFR-NT Processor/Cache
CPU:
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache:
Up to 22 Cores / Up to 55MB Cache
System Bus:
QPI up to 9.6 GT/s
Note:
BIOS version 2.0 or above is required
Note:
Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization System Memory
Memory Capacity: 16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes: RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors On-Board Devices
Chipset:
Intel C612 chipset
SAS:
SAS 3.0 (12Gbps) via Broadcom 3108
HW RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers:
Intel X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics:
ASPEED AST2400 BMC Input / Output (per node)
SAS:
8 SAS3 (12Gbps) ports
LAN:
2 RJ45 10GBase-T LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
2 USB 3.0 ports
VGA:
1 VGA port
Management
Software:
SuperDoctor 5
Watch Dog
NMI
IPMI 2.0
SUM and SSM
Power Configurations:
ACPI / APM Power Management
Power-on mode for AC power recovery Chassis
Form Factor:
4U Rackmount
Model:
CSE-F424AS-R1K28BP Available Colors
Black Front Panel
Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
2 Network activity LEDs
Information LED (UID, Fan failure, Overheat) Expansion Slots (per node)
PCI-Express:
1 PCI-E 3.0 x16 (LP) + 1 Micro LP
MicroLP Adapter Matrix (Networking options) Drive Bays (per node)
Hot-swap:
(6+2) 3.5" Hot-swap SAS3 HDD trays
8 SAS3 or 6x SAS3 + 2 NVMe (optional) Note: NVMe support requires 2 CPUs installed Backplane
1 SAS/SATA backplane
1 SAS/SATA/NVMe hybrid (2 slots) System Cooling (per node)
Fans:
2x 8cm 11k RPM middle fans Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input:
1000W Output at 100-140V, 8-12A, 50-60Hz
1280W Output at 180-240V, 6-8A, 50-60Hz
DC Output:
1000W: +12V/83A +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification:
Platinum Level Certified95%+: Platinum Certified
Test Report
System BIOS
BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI Operating Environment / Compliance
RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature:
-40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Item Dimension ( L inch x W inch x H inch)
43 x 29 x 15 Weight
150.00 lb Warranty Information
1 Year